1、METRICA-A-52521September 26, 1995SUPERSEDINGMS35841C15 January 1974MS51063C23 April 1976COMMERCIAL ITEM DESCRIPTIONFILLER NECK: RADIATOR(METRIC)The General Services Administration has authorized the use of thiscommercial item description (CID) for all federal agencies.1. SCOPE. This CID covers mediu
2、m and large size radiator filler necks for 64 and 95millimeter (mm) size radiator caps rated nominally at 41 to 55 kilopascals (kPa) and 34 to 48 kPapressure relieving, respectively.2. CLASSIFICATION. The filler necks shall be of the following types:Type I - Medium size (for 64 mm size radiator caps
3、)Type II - Large size (for 95 mm size radiator caps)3. SALIENT CHARACTERISTICS.3.1 Materials. The type I filler neck material shall be brass alloy, Unified Numbering System(UNS) 24000,26000, or 26800, temper-anneal, 1.02 mm thick. The type II filler neck materialshall be brass, sheet or strip, UNS 2
4、6000, temper-optional, 1.57 mm thick. The use of recoveredmaterial made in compliance with regulatory requirements is acceptable providing that allrequirements of this CID are met (see 6.5).Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-525213.2
5、 Heat treatment. The type II filler neck shall be stress relieved after forming.3.3 Design and construction. The filler necks shall be designed and constructed as specified inSAE J164 for medium and large filler necks.3.4 Identification and markings. Identification and marking of the filler necks sh
6、all bepermanent and legible and shall include as a minimum, the manufacturers identification code(CAGE) and the part identification number (PIN) (see 6.2).4.1 Responsibility for inspection. The contractor is responsible for the performance of allinspections (examinations and tests).4.2 Contractor ce
7、rtification. The contractor shall certify and maintain substantiating evidencethat the product offered meets the salient characteristics of this commercial item description andthat the product conforms to the producers own drawing, specifications, workmanship standards,and quality assurance practice
8、s. Items with known defects shall not be submitted forGovernment acceptance. The Government reserves the right to require proof of suchconformance prior to the first delivery and thereafter as may be otherwise provided for under theprovisions of the contract.5. PRESERVATION, PACKAGING, PACKING, LABE
9、LING, AND MARKING.Preservation, packaging, packing, and marking for the desired level shall be as specified in thecontract (see 6.2).6. NOTES. (This section contains information of a general or explanatory nature that may behelpful but is not mandatory.)6.1 Addresses for obtaining copies of referenc
10、e documents. Copies of SAE J164 “Radiator Capsand Filler Necks“ and The Metals and Alloys in the unified number system (UNS) publicationare available from the Society of Automotive Engineers, Inc., 400 Commonwealth Drive,Warrendale, PA 15096-0001.6.2 Ordering data. Acquisition documents must specify
11、 the following:a. Title, number, and date of this CID.b. Issue of DODISS to be cited in the solicitation and, if required, the specific issue ofthe individual documents referenced.c. PIN number and quantity of filler necks required.d. Selection of applicable level and packaging requirements.2Provide
12、d by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-525216.3 Part or identifying number (PIN). The PINs to be used for filler necks acquired to this CIDare created as follows:Type:1- Type I (medium size).2- Type 11 (large size).CID number.Designates a CID.6
13、.4 Cross-reference data. Filler necks conforming to this CID are interchangeable/substitutablewith filler necks conforming to MS35841 C and MS51063C.6.5 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials inaccordances with Public Law 94-580 to the maximum extent
14、 practicableMILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY:GSA-FSSCustodian:Army - AT PREPARING ACTIVITY:Air Force - 82 Army - ATReview activities: (Project 2930-0022)Navy - MC, SHDLA - CSAIRFORCE - 993Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
