1、A-A-5558b 9999974 Olb533L 247 pEiEl A-A-55586 31 Oct 1994 SUPERSEDING MS27966B 21 Dec 1987 COMMERCIAL ITEM DESCRIPTION HINGE, BUTT-NARROW, NON-TEMPLATE I The General Services Administration bas authorized the use of this commercial item description for all federal agencies. Scoae. This Commercial It
2、em Description (CID) covers commercial and industrial quality, non-template butt hinges suitable for use on wood and hollow core doors. Salient characteristics. I FAST PIN I t NOT SWAGED. FOR FULL SURFACE APPLICATION I SWAGED, FOR MORTISE APPLICATION Beneficial comments, recommendations, additions,
3、deletions, clarifications, etc., and data which may improve this document should be sent to: Commander, U.S Army Armament Research, - Development, and Engineering Center (ARDEC), ATTN: SMCAR-BAC-S, Picatinny Arsenal, NJ 07806-5000 AMSC NIA DISTRIBUTION STATEMENT A. Approved for public release; distr
4、ibution is unlimited. FSC 5340 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 6-A-55586 m 9999974 O365332 185 m A-A-55586 TABLE I. DASH NUMBERS AND DIMENSIONS. 1. Material: Body: Steel, in accordance with ASTM A506, low carbon, cold rolled. Pin: Br
5、ass in accordance with ASTM B36, UNS numbers C26000, C26800, C27200, C28000 all HO4 hard temper or ASTM B121 all specified UNS numbers with HO4 hard temper or corrosion-resistant steel, in accordance with ASTM A666. 2. Protective coating. zinc plated in accordance with ASTM B633, Type II, Class Fe/Z
6、nl3. 3. Hardware. Hinges are furnished with wood screws. The sizes specified are those normally furnished by the supplier. 4. &. The width dimension of not swaged hinge will be slightly narrower than shown. 5. Ail dimensions are in inches unless otherwise specied. 6. Workmanship. The hinges furnishe
7、d shall be free from imperfections which may impair durability or serviceability. Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this commercial item description, and that the product conforms
8、to the producers own drawings, specifications, stanards, and quality assurance practices. Items with known defects &ail not be submitted for government acceptance. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provid
9、ed for under the provisions of the contract. Packaging. Packaging shall be in accordance with ASTM D3951. CID based art identification number. The following part identification numbering procedure is for Government purposes and does not constitute a requirement for the contractor. Examule: AA 55586
10、- 2 Designates dash number (see table I) CID number Designates a CID 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55586 Cancelled MS PIN MS27966 - * 21 Notes. Replacement CID PIN AA55586- * 21 a. Ordering data. Acqusition documents must spec
11、ify the following: 1. Title, number, and date of this CID. 2. Arrangements for first article inspection or whether first article is not required. 3. Applicable level and packaging requirements. d b. Cross-reference data. Butt hinges conforming to this CID are interchangeablelsustitute with butt hing
12、es conforming to MS27966B dated 21 dec 1987. TABLE II. CROSS - REFERENCE TABLE. c. Remlatorv reauirements. The offeror/ contractor is encouraged to use recovered materiais in accordance with Public Law 94-580 to the maxhuum extent practical. Custodian: dY-AR, Navy-YD Air Force-99 Review activities: Army- AV, ME Navy-MC, SH Air Force-82 DLA-IS Preparing activity: dY-AR Agent: DLA-IS Project No. 5340-2181 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
