1、Comments, suggestions, or questions on this document should be emailed to usarmy.APG.cerdec.mbx.standardization-crxmail.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https:/assist.daps.dla.mil/ AMSC N/A
2、FSC 5940 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND A-A-59126 /2B 28 March 2012 SUPERSEDING A-A-59126 /2A 31 May 2011 COMMERCIAL ITEM DESCRIPTION SHEET TERMINALS, FEEDTHRU (INSULATED) STYLE FT02 The General Services Administration has authorized the
3、use of this commercial item description (CID) as a replacement for Style FT02 of MIL-T-55155/2 for all federal agencies. The requirements for acquiring the product described herein shall consist of this sheet and CID A-A-59126. REQUIREMENTS: Dimensions and configuration: see Figure 1. Figure 1. Conf
4、iguration and dimensions. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59126/2B 2 Part Number Dimensions A B C D E F G H J K AA59126/02- -01 .690 .287 12 - 28 UNF-2A .082 .
5、250 .225 .163 .031 .062 .188 NOTES: 1. Dimensions are in inches. 2. Unless otherwise specified, tolerances are 0.015inch. 3. Hex nut, brass, No. 12-28 UNF. 4. The washer and hex nut shall be plated with the same finish as that on the mounting base. 5. Drawing depicts only general design characterist
6、ics and is not intended to limit specific manufacturing processes. 6. Insulation material: Polytetrafluoroethylene. Dielectric withstanding voltage: see Table I. Table I. Dielectric withstanding voltage. Part Number Pressure Volts ac rms (min) AA59126/02 - - 01 Atmospheric 2,000 Reduced barometric 6
7、50 Pull: 10 pounds minimum. Torque: 2 ounce-inches, minimum. Type of mounting: threaded metal bushing. Table II. Substitutability data. Part number in A-A-59126/2 1/ Part number in MIL-T-55155/2B 1/ AA59126/02 - - 01 M55155/02-01 1/ The complete part number shall include the symbol for the insulatio
8、n color (first dash) and symbol for the conductor material and finish (second dash). Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59126/2B 3 MILITARY INTERESTS: CIVIL AGENC
9、Y COORDINATING ACTIVITY Custodian: GSA-7FXE Army - CR Navy EC Preparing activity: Air Force 85 Army CR Reviewer: (Project No. 5940-2012-002) DLA GS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/ . Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
