1、Comments, suggestions, or questions on this document should be emailed to usarmy.APG.cerdec.mbx.standardization-crxmail.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https:/assist.daps.dla.mil/ AMSC N/A
2、FSC 5940 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND A-A-59126 /24B 28 March 2012 SUPERSEDING A-A-59126 /24A 31 May 2011 COMMERCIAL ITEM DESCRIPTION SHEET TERMINALS, STUD (NONINSULATED) STYLE SE24 The General Services Administration has authorized the
3、 use of this commercial item description (CID) as a replacement for Style SE24 of MIL-T-55155/24 for all federal agencies. The requirements for acquiring the product described herein shall consist of this sheet and CID A-A-59126. REQUIREMENTS: Dimensions and configuration: see Figure 1. Figure 1. -
4、Configuration and Dimensions Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59126/24B 2 PART NUMBER DIMENSIONS Mounting Board Thickness (REF) A .005 B C D E F G H J K AA59126
5、/24X-01 .062 .188 .156 .093 .125 45 .060 .002 .029 .015 .042 DIA MAX RUNOUT .003 TIR .031 AA59126/24X-02 .094 .062 AA59126/24X-03 .125 .094 AA59126/24X-04 .156 .125 AA59126/24X-05 .037 .125 - .094 .094 - .063 +.000 -.005 .025 - .043 DIA .010 .016 AA59126/24X-06 .053 .031 AA59126/24X-07 .084 .062 AA5
6、9126/24X-08 .115 .094 AA59126/24X-09 .147 .125 AA59126/24X-10 .037 .125 - .031 .062 - .042 +.000 -.005 .016 .008 .026 DIA .010 .016 AA59126/24X-11 .053 .031 AA59126/24X-12 .084 .062 AA59126/24X-13 .115 .094 AA59126/24X-14 .147 .125 AA59126/24X-15 .053 .070 - .050 .047 - .032 +.000 -.005 .020 - .020
7、.010 .031 AA59126/24X-16 .084 .062 AA59126/24X-17 .115 .094 Figure 1 - Configuration and Dimensions (continued) Figure 1 Notes: 1. Dimensions are in inches. 2. Unless otherwise specified, tolerance is 0.005 inch for item numbers -01 through -04 and 0.010 inch for items -05 through -17 on decimals an
8、d 3 on angles. 3. Drawing depicts only general design characteristics and is not intended to limit specific manufacturing processes. Type of mounting: swage. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted wi
9、thout license from IHS-,-,-A-A-59126/24B 3 Table I. Substitutability data. Part number in A-A-59126/24 1/ Part number in MIL-T-55155/24C 1/ AA59126/24X-01 M55155/24X-01 AA59126/24X-02 M55155/24X-02 AA59126/24X-03 M55155/24X-03 AA59126/24X-04 M55155/24X-04 AA59126/24X-05 M55155/24X-05 AA59126/24X-06
10、M55155/24X-06 AA59126/24X-07 M55155/24X-07 AA59126/24X-08 M55155/24X-08 AA59126/24X-09 M55155/24X-09 AA59126/24X-10 M55155/24X-10 AA59126/24X-11 M55155/24X-11 AA59126/24X-12 M55155/24X-12 AA59126/24X-13 M55155/24X-13 AA59126/24X-14 M55155/24X-14 AA59126/24X-15 M55155/24X-15 AA59126/24X-16 M55155/24X
11、-16 AA59126/24X-17 M55155/24X-17 1/ The complete part number shall include the symbol for the conductor material and finish. MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY Custodian: GSA-7FXE Army - CR Navy AS Preparing activity: Air Force 85 Army CR Reviewer: (Project No. 5940-2012-013) DLA
12、 - GS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/ . Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
