1、 Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that may improve this document should be sent to DAMI_STANDARDIZATIONconus.army.mil or U.S. Army RDECOM, Tank Automotive Research, Development and Engineering Center, ATTN: RDTA-EN/STND/TRANS MS #268, 6501
2、 E. 11 Mile Road, Warren, MI 48397-5000. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https:/assist.daps.dla.mil. AMSC N/A FSC 4730 Distribution Statement A. Approved for public release; distribution is unli
3、mited. INCH-POUND A-A-59326/19B April 22, 2011 SUPERSEDING A-A-59326/19A May 1, 2003 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET COUPLING HALF, NIPPLE ADAPTER, MALE BY EXTERNAL GROOVED PIPE, TYPE XIX The General Services Administration has authorized the use of this commercial item description f
4、or all federal agencies. The complete requirements for procuring couplings described herein shall consist of this document and the latest issue in effect of A-A-59326. + .0 3 1 - .0 1 6 + .0 0 0 - .0 2 0 .1 2 0 M IN 4 .5 0 0 . 0 1 5 C 1 .0 0 0 M IN CA M - L O CK INT ERFACE (SEE A - A - 59326 ) FI L
5、L ET RADIUS .0 2 0 . 0 1 0 (G RO O V ED PIPE I NT ERFACE T O A - A - 52598 ) 4 5 0 .5 D A B . 0 3 1 .0 3 1 FIGURE 1. Coupling half. NOTES: 1. For interpretation of dimensioning and tolerancing, see ASME Y14.5M. 2. Dimensions are in inches. Provided by IHSNot for ResaleNo reproduction or networking p
6、ermitted without license from IHS-,-,-A-A-59326/19B 2 1. SCOPE. This specification sheet covers a Nipple Adapter, Male by External Grooved Pipe, Type XIX Coupling Half. 2. CLASSIFICATION. The size of the coupling halves is designated in table I. TABLE I. Coupling half dimensions. Dash Cam-Lock Pipe
7、Groove Dimensions No. Nom. Size A B C D 1 4 4.500 0.625 1.000 4.334 2 6 6.625 0.625 1.000 6.455 3. SALIENT CHARACTERISTICS. Salient Characteristics are identified in the latest issue of A-A-59326. Following characteristics may differ from that mentioned in A-A-59326 3.1 Working Pressure. Both 4-inch
8、 and 6-inch cam-locking type adapters shall be rated 150 psi. 4. NOTES 4.1 Part Identification Number (PIN). The following PIN procedure is for government purposes and does not constitute a requirement for the contractor. This example describes a part numbering system for specification sheet A-A-593
9、26/19. AA59326/19-1-SS; where /19 indicates a Nipple Adapter, Male by External Grooved Type XIX Coupling Half, -1 indicates a 4-inch nominal size, -SS indicates stainless steel body. Material: A - Aluminum Alloy B - Copper Alloy (Brass or Bronze) BA - Aluminum Bronze SS - Stainless Steel Provided by
10、 IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59326/19B 3 MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - FAS Custodians: Army - AT Preparing Activity: Navy - YD Army - AT Air Force - 99 (Project 4730-2011-031) Review Activities: Army - AV,
11、GL Navy - MC, SH Air Force - 71 DLA - CC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
