1、MIL-B-60339 13 977790b 0337630 7 MILB-60319 (MU) 2 APRIL 1965 SUPERSEDING (SEE 6.4) MILITARY SPECIFICATION BURSTER, PROJECTILE, M3t9 LOADING, ASSEMBLING AND PACKING 1. SCOPE 1.1 This specification covers the loading, assembling and packing .for one type of burster designated as Burster, Projectile,
2、M10. MILSTD-109 - Q u a 1 it y Assusance Terms and Defini- tions. MIL- STD-1235 - Single and Multilevel 2. APPLICABLE DOCUMENTS 3.1 The following documents of the issue in effect on date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein.
3、 SPECIFICATIONS MILITARY Continuous Sam - p 1 i n g Procedures and Tables for In- spection by Attri- butes. DRAWINGS ORDNANCE CORPS 9205343 - Burster, Projectile MIL-A-2-550 - Ammunition and Spe- cia1 Weapons, Gen- er a I Specification M19 Assembly. fos. 8799212 - Carton, Packing, Am- MIL-1-45607 -
4、Inspection E q u i p - munition, for ment, Supply and Burster, Projectile, Maintenance of M19. STANDARDS MILITARY 8799213 - Box, Packing, Ammu- nition, for Burster, Projectile, Ml9. MIL-STD-IO6 - Sampling Procedures and Tables for In- 8796622 - Marking Diagram spection by Attri- and Sealing far bute
5、s (ABC-STD- Wood Packing 105.) Boxes. THOS coRTr%irfls L PAGES. - -GZL-l 1. - - - 1- _ I I t - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. MIL-B-bO337 33 W . 777970b 0337633 7 MJL+ chips, cracks, dirt, grease, rust and other foreign material. T
6、he cleaning method shall not be injurious to any of the parts nor shall the parts be contaminated by the cleaning agent. 4. QUALITY ASSURANCE PROVISIONS 4.1 General quality assurance provisions. ss otherwise specified in the contract or purchase order, the supplier is responsible for the performance
7、 of all inspection re- quirements as specified herein. Except as otherwisd specified, the supplier may utilize his own facilities or any commercial labora- tory acceptable to the Government. The Government reserves the right to perform B + 7 any of the inspections set forth in the speci- fication wh
8、ere such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. Refer- ence shall be made to MIGSTD-109 in order to define terms used herein. The pro- visions of MIL-A-2550 shall apply. 4.1.1 Submission of pyoduct. At the time the completed lot of produc
9、t is submitted to the Government for acceptance the contrac- tor shall supply the following information accompanied by a certificate which attests that the information provided is correct and applicable to the product being submitted : (a) A statement that the lot complies with all of the quality-as
10、surance provisions specified within this specification. (b) Number of units of product in- spected. (e) Results obtained, by *defect code, for all inspection performed. (d) Drawing, specification number. and date, together with an identifica- tion and date of changes. .(e) Certificates of compliance
11、-on-all ma- terial purchased by the contrac- tor when such material is con- trolled by Government specifica- tions referenced in any of the cantractual documents. (f) Number of items in the lot. (g) Date submitted. _“ The certificate shall be signed by a -fesponsi- ble agent of the certifying organi
12、zation. The initial certificate submitted shall.be tailed drawings which depict all information necessary to completely fabricate, calibrate and operate an item of inspection equipment. This requires that the necessary views, di- mensions, materials, finish, notes, operating and calibration instructions be properly de- picted in accordance with appi-oved prac- Custodian: Army-MU Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
