1、MILITARY SPECIFICATION MI L-B- 6 0 4 if! ( %lJ ) ANZNDMENT 2 21 June i972 SUPERSEDING APENDMENT 1 11 February i972 BLASTING MACHINE, HANDLE OPERATED, NETAL . CASE, 10 CAP CAPACITY This Amendment forms a part of Military Specification MIL-B-60410 (MG) dated 21 Sept 1966. Page 5, paragraph 3.4.2: Dele
2、te reference to 52 ohms“ and substitute “35 ohmstt. Add to end of last sentence: “when tested on a load of “35 ohms“. Add to end of paragraph the following: !The instruction plate shall indicate the maximum external re- sistance through which the blasting machfne can flre as Maxinuni. 35 ohms. to th
3、e brass instruction plate in accordance with Figure I.ll I (Destruct ive 1 . Page 8, paragraph 3.9: The NATO Symbol of Interchangeakility shall be applie Page 17, paragraph 4.4.1: Add to enci of paragraph - Page 20, paragraph 5.3: Add to end of paragraph the following: The I, and shall indicate the
4、designation Maxiklurri. . . .35 onms . NATO Symbol of Interchangeability shall be applied to each unit interior and exterior shipping container in accordance with Figure -I- Il Page 21, paragraph 6.1: Delete 6.1.b, Data Cards“ in its entirety. Page 24, paragraph 6.7: Add the following: “6.7 Internat
5、ional standardization agreement.-Certain provisions of this speciflcation (sections 3 and 5) are the subject of inter- national standardization agreement STANAG No. 2818. ?hen amenament, revision or cancellation of this specification is proposed which will effect or violate the International agreeme
6、nt; concerned, the preparing activity will take appropriate reconciliation action through international standardization channels including depart- mental standardization offices, if required.“ Page 25, Add “Figure I“. Custodian: ARMY-MU Project Number: 1375-A-O14 Preparing activity: ARMY -MU FSC: 13
7、75 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I) ML-B-b04LO (2) 13 i 999906 0338270 3 ,*IL-B-60410 (MU) :b i J Amendment . 2 J FIGURE I . I : NATO SYMBOL OF I NTERCHANGEABI L i TY H/ 1 O=R H/ 1 O-R 7 NOTES: A. Dimension H (DIM than twice height
8、of 1 Solid Color DIM. H 1 H) shall not be less than height nor more nomenclature marking. B. Symbol, for appl cable packaging or packing, shall be applied to side of carton or box to the right or left of the nomenclature marking using the same ink and color as required for lettering. C. Symbol, when
9、 used on end item or any of end item components where practical, shall be applied to right or left of identifying nomenclature using same ink and color as required for lettering. . . - D. needs of: the appl cable requf rements. Symbol may be proportionately enlarged or reduced to meet the .2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
