1、 MIL-B-71132 (AR) AMENDMENT 2 05 December 1995 SUPERSEDING AMENDMENT 1 O9 November 1994 MILITARY SPECIFICATION BODY ASSEMBLY, 81MM FOR CARTRIDGE, PRACTICE M880 This amendment forms a part of MIL-B-71132 (AR), dated 26 May 1992, and is approved for use by the U.S. Army Armament Research, Development
2、 and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense. PAGE 3 3.2, Delete: “12944199“, and substitute: “12944195“. PAGE 9 4.4.2.2, Major 108, Delete in its entirety. Major 109, Delete in its entirety. Major 115, Delete the word *%ent“, and sub
3、stitute: “increment“. Add the following characteristics under the major classification: “130 Diameter of dud plug through holes III 3.2 Gage 131 Location of dud plug through holes III 3.2 Gage 132 Diameter of dud plug hole counterbores under min III 3.2 Gage 133 Depth of dud plug hole counterbores I
4、II 3.2 Gage 134 True position of dud plug holes to dud plug hole counterbores III 3.2 Gage. 1 of 2 AMSC NIA FSC 1315 DISTRIBIITION STATEMENT A. Apprd for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B
5、7 1132 (AR) AMENDMENT2 The margins of this amendment are marked with an asterisk, or vertical line to indicate where.changes (additions, modifications, corrections, deletions) from the previous amendment were made. and the Government assumes no liability whatsoever for any inaccuracies in these not
6、ations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous amendment. This was done as a convenience only Custodian: Army-AR 2 Preparing activity: (Project 1315-0104) Army-= L_- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
