1、MIL-D-SLO9BF LI2 M 7777706 0239308 8 M MIL-D-51048F( EA) MIL-D-510 48E ( MU) 13 July 1972 MILITARY SPECIFICATION DECONTAMINATING APPAFiATUS, PORTABLE, m2, 142 QUART, mi This specification is approved for use by Edgewood Arsenal, Department of the Army, and is available for use by all Depart- ments a
2、nd Agencies of the Department of Defense. 1. SCOPE 1.1 This specification covers one type of decontaminating apparatus. 2. APPLICABLE DOCUMENTS 2.1 Government documents. The following documents of the issue in effect on date of invitation for bids or request for proposal, form a part of this specifi
3、cation to the extent specified herein: SPECIFICATIONS 781 - Strapping, Steel, Flat and Seals. PPP-B-26 - Bag, Plastic (General Purpose). PPP-B-601 - Box, Wood, Cleated-Plywood. PPP-B-621 - Box, Wood, Nailed and Lock-Corner. PPP-B-636 - Box, Shipping, Fiberboard. MIL-B-46506 - Box, Ammunition Packing
4、, Wood, Wirebound. STANDARDS FEDERAL Fed. Std. No. 601 - Rubber: Sampling and Testing. Fed. Std. No. 356 - Commercial Packaging of Supplies and Testing. FSC 4230 THIS DOCUMENT CONTAINS 15 PAGES. n Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-HL-D-
5、5104 8F ( EA) MILITARY MILSTD-lo5 - Sampling Procedures and Tables for Inspection by Attributes. ML-STD12g - Marking for Shipent and Storage. MIL-STD-1168 - Lot Numbering of Ammunition. DRAWINGS US ARMY ARE411E4ENT COMMAND EDGENOOD ARSENAL DL5-51-269 - Decontaminating Apparatus, Portable, DS2, 1-1/2
6、 DL5229-A50-9759 - Fixed Dial Indicator. D5220-A50-9756 - Fixed, Iiocation. C5220-A50-9757 Plug, Thread Setting. DL5220-850-9758 - Fixture, Dial indicator. Quart, ABC-K1. (Copies of specifications, standards, drawings and publications required by suppliers in connection with specific procurement fun
7、ctions should be obtained from the procuring activity or as directed by the contracting officer. ) 3.1 Materials and components. 3.1.1 Materials. AU materials cited on Drawing D5-51-269 or on the subsidiary drawings shall conform to the specifications listed there- on, or to the specific characteris
8、tics set forth on the drawings. 3.1.2 Components. All components of the decontaminating apparatus shall conform to the specifications and drawings listed on Drawing D5- 51-269 and subsidiary drawings. 3.2 Assembly. The decontaminating apparatus shdl be assembled as shown on Drawing D5-51-269. 3.3 Co
9、ntainer. The container, Drawing D5-51-302, when subjected to a hydrostatic pressure of 375-15 pounds per square inch gage (psig) for a period of 60 + - 5 seconds, shall not leak when tested as specified in 4.4.4.1. 3.4 Spray head assembly. The spray head assembly (less container and bracket) when su
10、bjected to an air pressure of 240 f 5 psig, shall 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-D-51048F( EA) not show a pressure drop greater than 242 psig in a period of 60 - + 5 seconds when tested as specified in 4.4.4.2. when subjected t
11、o an internal hydrostatic pressure of 720 psig minimum for a minimum period of 30 seconds when tested as specified in 3.5 Burst, - The empty container (see 3.3) shall not leak or burst 4.4.4.3. 3.6 Functioning . 3.6.1 Empty. The decontaminating apparatus shall puncture the nitrogen- filled cylinder
12、and discharge the nitrogen through the nozzle. All operational parts shall function freely when tested as specified in 4.4.4.4(a). 3.6.2 Filled, The decontaminating apparatus, filled with E2 (see 6.2) or propylene glycol as applicable (see 4.3.3.1(b) and 4.4.4.4(b), shall produce a spray which is fu
13、ll and symmetrical. When fully pressurized, the spray shall carry a minimum distance of six feet under ambient temperature and zero wind speed, The spray pattern at the above distance shall be a minhum of 10 inches in diameter when tested as specified in 4.4.4.4(b), 3.7 Volumetric change in O-rings.
14、 Volumetric change as specified on Drawing B5-51-371 shall not exceed 12 percent when tested as specified in 4.4.4.5. 3.8 Body soundness. The soundness of the body shall conform to Drawing D.5-51-31 when tested as specified in 4.4.4.6. 3.9 Preproduction. Prior to the start of regular production, a p
15、re- production lot of decontaminating apparatuses shall be produced in accordance with this specification for examination and tests (see 4.3). The decontaminating apparatus shall be free from burrs, sharp edges or deformation which could affect its intended use. grease or dirt) and damage such as de
16、nts, cracks, 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection. 4.1.1 Suppliers responsibility. Unless otherwise specified in the contact or purchase order, the supplier is responsible for the performance of all inspection requirements 51s specified herein. Except as otherwise specif
17、ied in the contract or order, the supplier may use his own or any other facilities suitable for the performance of the inspection require- ments specified herein, unless disapproved by the Government. The Govern- - Provided by IHSNot for ResaleNo reproduction or networking permitted without license
18、from IHS-,-,- MIL-D-5104F 42 777770b 0234333 4 MIL-D-51048F( EA) ment reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements . 4.1.2 Objective evidence. The sup
19、plier shall provide obJective evidence acceptable to the contracting officer that the requirements of 3.1 and section 5 for which specific inspection has not been provided in this speci- fi c at i on have b ee n sat is fi ed . 4.2 Classification of inspections. (a) Preproduction inspection (see 4.3)
20、 (b) QuaLity conformance isnpection (see 4.4). 4.3 Preproduction inspection. 4.3.1.1 Decontaminatinp apparatus. A preproduction lot of 100 sets of Components components shall be manufactured using the same methods, materias, equip- ment and processes as will be used during regular production. shdl b
21、e assenibled to meet the lot quantities specified in table I, 4.3.1.2 O-Rings. Including the above, para 4.3.1.1, a preproduction lot of 200 of each type O-Ring conforming to Dwg B5-51-371 shall be manufactured using the same methods, materials, equipent and processes as will be used during regular
22、production . 4.3.2 Sampling. 4.3.2.1 For examination and nondestructive tests. Sampling shall be conducted at random in accordance with table I in the sequence listed. 4.3.2.2 For destructive tests. (a) Burst. A sample of 38 containers shall be taken at random from the preproduction lot. Twenty-two
23、for test and 16 for retest. (b) O-rings. A sample of 30 O-rings shall be taken at random from the preproduction lot. 4.3.3 Inspection procedure. 4.3.3.1 For examination and nondestructive tests. (a) Components. Each component shall be examined and tested for all the drawing requirements, the accepta
24、nce number is zero. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-D-51048F( EA) TABLE 1 - Sampling rn+.it.v : Container : O-Rings : Body : Spray head assembly : Container : Nozzle : Apparatus .- . - : 200 es : ?O ea : : 100 .- : 98 : 30 : 62/
25、78% : 62/788 : : 100 1 u- : 62/78* : 30 4.3.3.1(b) : Preparation for delivery #Of the original 100 preproduction lot of containers those remaininig after destructive testing, 4.3.3.2(a), shall be used to meet the remaining requirements. : 62/78* : 30 (b) Decontaminating apparatus , container, spray
26、head assembly, nozzle and preparation for delivery. and tested in accordance with the classification of defects (4.4.3.4), except major defect i05 of 4,4.3.4(a) is not applicable. The AQLs do Each sample item shal be examined not ppy. The acceptance nuniber is zero. (c) Decontaminating apparatus (fi
27、lled). The sample apparatus, examined and tested in accordance with 4.3.3.1(b), if accepted, shall be tested in accordance with 4.4.4.4(b) except that the container shall be filled with DS2 from the 1-1/3 quart can (see 6.2 and 6.3). The acceptance number is zero. 4.3.3.2 For destructive tests. (a)
28、Burst. The 22 sample containers shall be tested in accord- ance with 4.4.4.3. containers. rejected. ance with 4.4.4.5. If one container fails, retest using the remaining 16 If two containers f. 4.4.2.1 For examination and nondestructive tests (a) Decontaminating apparatus (empty). Sampling shall be
29、con- ducted in accordance with MILSTD-105. (b) Decontaminating apparatus (filled) Sampling shall be conducted in accordance with MIL-STD-105, level S-3. 4.4.2.2 For destructive tests. (a) Burst. One container shall be taken at random from every 500 containers . (b) O-ring Sampling shall be conducted
30、 in accordance with MILSTD-105, level S- (c) Body soundness. Sampling shall be in accordance with MIL-STD-105, level S-3. 4.4.3 Inspection procedure. 4.4.3.1 For examination and nondestructive tests. (a) Decontaminating apparatus (empty). The sample apparatus and the level A preparation for delivery
31、 shall be examined and tested in accordance with the classification of defects and MILSTD-105. 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-D-5L04F 42 7777706 0234324 3 = - - MIL-D-51048Ff EA) (b) Decontaminating apparatus (filled). The samp
32、le apparatus shall be tested in accordance with 4.4.4,4(b) and MIL-STD-105, using an AQL of 1.5 percent defective. 4.4.3.2 For destructive tests. (a) Burst. The sample container shall be tested in accordance with 4.4.4.3. The acceptance number is zero. (b) O-ring. The sample O-rings shall be tested
33、in accordance with 4.4.4.5 and MIL-STD-105, using an AO PPP-B-636 5.2.3 Commercial. Comercial packing sha31 be as specified in FED-STD-356. 5.3 Palletization. When specified in the contract or order (see 6.2), the apparatus shall be pallethed in accordance with Drawing D5-51-328. 5.4 Marking. In con
34、junction with pertinent information provided in the contract or order, marking shall be as follows: 5.4.1 Packaging. Packages, 5.1.1.1 and 5.1.1.2, shall be marked in accordance with MIL-STD-129. 5.4.2 Shipping (exterior) container, levels A & B. in accordance with Drawing D5-51-378. Boxes shall be
35、marked Address marking is not required on individual boxes when palietized or shipped in full carload or truckload lots from a single consignor to a single consignee. 5.4 . 3 Shipping (exterior) container comercial . Boxes shall be marked in accordance with FED-STD-356. 5.4.4 PaJJetization, Palletiz
36、ed loads shall be marked in accordance with Drawing D5-51-328. 6. NOTES 6.1 Intended use. This item is intended for use in the field for spraying Ixs2 decontaminating agent. in the field. It can be hand carried and refilled 12 Provided by IHSNot for ResaleNo reproduction or networking permitted with
37、out license from IHS-,-,-1-51048F( EA) 6.2 Ordering data. Procurement documents should specify the following: (a) (b) (c ) Preproduction. Title, number and date of this specification. Level of packaging and packing required. (i) (2) (3) fime ailowed for supplier submission of samples for Govern- Nam
38、e and address of test facility and shipping instruc- Time required for the Government to notia the supplier ment test and evaluation after award of contract. tions when testing is performed by the Government. whether or not to proceed with production, (d) When palletization is required. (e) The DS2
39、(MIL-D-50030) will be Government furnished. 6.3 Component specification. The component specification for this item is as follows: MIL-C-51098 - Cylinder, Nitrogen-Filled, Puncturable Seal. 6.4 Caution. Suppliers ase hereby notified to provide adequate pro- tection for personnel during testing with h
40、igh pressures and DS2. 6.5 Batch. A batch is defined as that quantity of material which has been manufactured by some unit chemical process or subjected to some phys- ical mixing operation intended to make the final product substantially uniform. 6.6 International interest. Certain provisions of thi
41、s specification are sub j eet of international standardization agreement (Quadripartite Standardization Agreement QSTAG No. 235). When amendments, revision or cancellation of this specification are proposed, the departmental custodians will inform their respective Departmental Standardization Office
42、s so that appropriate action may be taken respecting the inter- nat ional ape ment concerne d. Custodim: Am - EA Preparing activity: Am - E23 Project No. 423O-AO54 *US. GOVERNMENT PRINTING OFFICE: 1976-603-766/6644 13 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
