1、 AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET LAPEL BUTTON, DISTINGUISHED SERVICE MEDAL, BUREAU OF ALCOHOL, TOBACCO AND FIREARMS This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herei
2、n shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Gilding Metal FINISH: Hard Enameled, Nickel Plated, Silver Plated, Oxidized, Buffed Relieved, Polished Highlights and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 15. DIMENSIONS: DIA
3、METER: 5/8 inch (REF) THICKNESS (at edge): 0.085 inch + 0.005 inchINCH-POUND MIL-DTL-11484/221B 3 March 2010 SUPERSEDING MIL-DTL-3628/221A 27 September 1996 #18 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/221B Page 2 of 2 NOTES: 1.
4、The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Enameled area shall be blue as indicated. The enamel color shall conform to TIOH Enamel Color Chip Number 18. 3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the manufactur
5、er. 4. Attaching device shall be prong with pick and flat ball type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue
6、due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Review activities: (Project No. 8455-2010-100) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
