1、MIL-DTL-LL484/238 m Ob 2015078 3T3 m r NOT MEASUFW4ENT SENSITIVE I MIL-DTL-11484/238 29 February 1996 DETAIL SPECIFICATION SHEET LAPEL BUTTON, DISTINGUISHED SERVICE, NATIONAL RECONNAISSANCE OFFICE This specification is approved for use by all Departments and Agencies of the Department of Defense. Th
2、e requirements for acquiring the product described herein shall consist of this specification sheet and the issue of MIL-DTL-11484 listed in that issue of the Department of Irefense Index of Specifications and Standards (DoDISS) specified in the solicitation. MATERIAL: Red Brass FINISH: Gold Plated,
3、 Matte Finish and shall match TIOH Metal Finish Chip Number 7. DIMENSIONS : DIAMETER: 5/8 inch (1.59 cm) (REF) Thickness (At Edge): 0.085 inch - + 0.005 inch (2.06 cm - + 0.12 cm) NOTES : 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. AMSC N/A FSC 8455 D
4、ISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. 1 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- NIL-DTL-B14B4/238 9999906 2015079 23T MIL-DTL-11484/238 2. Attaching device shall be a prong with pick and flat b
5、all type clutch. The prong shall be centered on the reverse side and soldered or fused in place. Custodians: Army - IH Review activities: DLA - CT Preparing activity: Army - IH (Project No. 8455-0835) 2 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
