1、INCH-POUND MIL-DTL-11484/28E 29 August 2008 SUPERSEDING MIL-DTL-11484/28D 27 September 1996 DETAIL SPECIFICATION SHEET LAPEL BUTTON, CIVILIAN AWARD FOR VALOR, AIR FORCE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring
2、 the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass DIMENSIONS: DIAMETER: 9/16 inch (REF) THICKNESS (at edge): 0.045 inch + 0.005 inch FINISH: Gold Plated, Rose Gold Plated, Relieved, Matte Finish, Polished Highlights and
3、 shall match The Institute of Heraldry Metal Finish Chip Number 20. AMSC N/A Page 1 of 2 FSC 8455 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/28E Page 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Governm
4、ent furnished hub or die. 2. Lapel button shall be lacquered. 3. Attaching device shall be prong with pick and flat ball clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to
5、 identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Air Force 11 (Project No. 8455-2008-169) Review activities: Air Force - 99 DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
