1、 AMSC N/A Page 1 of 2 FSC 8455 INCH-POUND MIL-DTL-11484/300B 1 May 2009 SUPERSEDING MIL-DTL-11484/300A 21 July 2004 DETAIL SPECIFICATION SHEET LAPEL BUTTON, CIVILIAN EMPLOYEE OF THE YEAR, COAST GUARD This specification is approved for use by all Departments and Agencies of the Department of Defense.
2、 The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Gilding Metal FINISH: Hard Enameled or Epoxied, Nickel Plated, Mirror-like Polished, and shall match The Institute of Heraldry (TIOH) Metal Finish C
3、hip Number 16. DIMENSIONS: HEIGHT: 9/16 inch (REF) WIDTH: 5/8 inch (REF) THICKNESS (at edge): 0.060 0.005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from
4、 IHS-,-,-MIL-DTL-11484/300B Page 2 of 2 2. Attaching device shall be prong with pick and flat ball type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. 3. Enameled/epoxied areas shall be as shown. The colors shall conform to TIOH Hard Enamel Color C
5、hip numbers listed below: COLOR CHIP NUMBER Red 1 Blue 18 White 28 CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Navy NU (Projec
6、t No. 8455-2009-079) Review activities: Coast Guard - CG DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
