1、 INCH-POUNDMIL-DTL-11484/301A30 July 2008 SUPERSEDING MIL-DTL-11484/301 7 October 2003 DETAIL SPECIFICATION SHEET LAPEL BUTTON, EXCEPTIONAL ADMINISTRATIVE ACHIEVEMENT MEDAL, NASA This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for
2、 acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass FINISH: 24K Gold Plated, Matte Finished, Polished Highlights, and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. DIMENSIONS: DIAMETER
3、: 11/16 inch (REF) THICKNESS (at thickest part of scroll on edge): 0.084 0.005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Attaching device shall be prong with pick and flat ball type clutch. The prong shall be centered on the reverse s
4、ide and fused or soldered to the lapel button. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. ASMC N/A Page 1 of 2 FSC 8455 Provided by IHSNot for ResaleNo reproduction or networki
5、ng permitted without license from IHS-,-,-MIL-DTL-11484/301A Page 2 of 2 Custodian: Preparing activity: Army - IH Army - IH (Project No. 8455-2008-146) Review activities: DLA CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
