1、 AMSC N/A 1 of 2 FSC 8455 INCH-POUND MIL-DTL-11484/311A 20 November 2009 SUPERSEDING MIL-DTL-11484/311 11 January 2005 DETAIL SPECIFICATION SHEET LAPEL BUTTON, PUBLIC SERVICE COMMENDATION AWARD, COAST GUARD This specification is approved for use by all Departments and Agencies of the Department of D
2、efense. The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass DIMENSIONS: DIAMETER: 1/2 inch (REF) THICKNESS: At edge: 0.055 inch 0.005 inch At thickest point: 0.090 inch 0.005 inch FINISH: Gol
3、d Plated, Matte Finished, Polished Highlights, and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Attaching device shall be prong with pick and flat ball type clutch. The
4、prong shall be centered on the reverse side and fused or soldered to the lapel button. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/311A 2 of 2 CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify
5、 changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Navy - CG (Project No. 8455-2010-020) Review activities: DLA CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
