1、INCH-POUND MIL-DTL-11484/317 27 October 2006 DETAIL SPECIFICATION SHEET LAPEL BUTTON, DISTINGUISHED PUBLIC SERVICE AWARD, U.S. AIR FORCE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein sh
2、all consist of this specification sheet and the latest revision of MIL-DTL-11484. MATERIAL: Red Brass DIMENSIONS: DIAMETER: 5/8 inch (REF) THICKNESS: At thickest point: 0.085 inch 0.010 inch FINISH: Gold Plated, Matte Finish, Polished Highlights and shall match The Institute of Heraldry (TIOH) Metal
3、 Finish Chip Number 8. NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Attaching device shall be prong with pick and flat ball type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. AMSC N/A 1 of
4、2 FSC 8455 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/317 Custodian: Preparing activity: Army - IH Army - IH Air Force - 99 Review activities: (Project No. 8455-2007-008) DLA CT NOTE: The activities listed above were interested in
5、this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. 2 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
