1、AMSC N/A 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET LAPEL BUTTON, NATIONAL INTELLIGENCE MEDAL FOR VALOR OFFICE OF THE DIRECTOR OF NATIONAL INTELLIGENCE This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product descr
2、ibed herein shall consist of this specification sheet, the latest issue of MIL-DTL-11484, and a request from the Office of the Director of National Intelligence. MATERIAL: Red Brass 85/15 (UNS Alloy C-230) FINISH: 24K Gold Plated, Matte Finish, Polished Highlights and shall match The Institute of He
3、raldry (TIOH) Metal Finish Chip Number 8. DIMENSIONS: HEIGHT: 11/16 inch (REF) WIDTH: 11/16 inch (REF) THICKNESS: 0.110 0.010 inch ATTACHING DEVICE: 1. Attaching device shall be prong with pick and flat ball type clutch. 2. The prong shall be centered on the reverse side and fused or soldered to the
4、 lapel button. INCH-POUND MIL-DTL-11484/326 08 July 2013 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/326 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The TIOH epoxy co
5、lor chip #20, dark blue, is used where indicated. 3. If hard enamel is used then the material will be Gilding Metal 95/5 (UNS Alloy C-210). 4. This item is not authorized for commercial sale, and may be produced only under government contract and at the request of the Office of the Director of Natio
6、nal Intelligence. Custodian: Preparing activity: Army - IH Army - IH Review activity: (Project No. 8455-2013-162) DLA - CT Civil Agency: ODNI - NIAP NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
