1、AMSC N/A 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET LAPEL BUTTON, NATIONAL INTELLIGENCE MEDAL FOR SUPERIOR PUBLIC SERVICE, OFFICE OF THE DIRECTOR OF NATIONAL INTELLIGENCE This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquirin
2、g the product described herein shall consist of this specification sheet, the latest issue of MIL-DTL-11484, and a request from the Office of the Director of National Intelligence. MATERIAL: Red Brass 85/15 (UNS Alloy C-230) FINISH: Silver Plated, Oxidized, Buffed Relieved, Matte Finish, Polished Hi
3、ghlights and shall match The Institute of Heraldry Metal Finish Chip Number 15. DIMENSIONS: HEIGHT: 11/16 inch (REF) WIDTH: 11/16 inch (REF) THICKNESS: 0.075 0.010 inch. ATTACHING DEVICE: 1. Attaching device shall be prong with pick and flat ball type clutch. 2. The prong shall be centered on the re
4、verse side and fused or soldered to the lapel button. INCH-POUND MIL-DTL-11484/328 13 August 2013 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/328 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Government f
5、urnished hub or die. 2. This item is not authorized for commercial sale, and may be produced only under Government contract and at the request of the Office of the Director of National Intelligence. Custodian: Preparing activity: Army - IH Army - IH Review activity: (Project No. 8455-2013-183) DLA -
6、 CT Civil Agency: ODNI - NIAP NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
