1、AMSC N/A FSC 8455 DETAIL SPECIFICATION SHEET LAPEL BUTTON, HUMANITARIAN SERVICE MEDAL, DEFENSE LOGISTICS AGENCY This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this speci
2、fication sheet, the latest issue of MIL-DTL-11484. MATERIAL: Red Brass 85/15 (UNS Alloy C-23000) FINISH: Brass, Oxidized, Buffed Relieved, and shall match The Institute of Heraldry (TIOH) Metal Finish Chip #4. DIMENSIONS: DIAMETER: 9/16 inch (REF) THICKNESS (at thickest point): 0.065 0.010 inch ATTA
3、CHING DEVICE: Attaching device shall be prong with pick and wing type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. INCH-POUND MIL-DTL-11484/339 11 July 2011 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from
4、 IHS-,-,-MIL-DTL-11484/339 Page 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. Custodian: Preparing activity: Army - IH Army - IH Review activity: (Project No. 8455-2011-031) DLA - CT NOTE: The activities listed above were interested in thi
5、s document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
