1、 AMSC N/A Page 1 of 2 FSC 8455 INCH - POUND MIL-DTL-11484/343 26 July 2012 DETAIL SPECIFICATION SHEET LAPEL BUTTON, MERITORIOUS SERVICE MEDAL, DEFENSE TECHNICAL INFORMATION CENTER This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements fo
2、r acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230) DIMENSIONS: HEIGHT: 5/8 inch (REF) WIDTH: 39/64 inch (REF) THICKNESS (across top star): 0.082 inch 0.010 inch Areas shaded gray sh
3、all be filled with BLUE #33. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/343 Page 2 of 2 FINISH: Silver Plated, Oxidized, Buff Relieved, Matte Finish, and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 14. EPO
4、XY: Epoxy enamel shall be applied to the Obverse of the pendant only as indicated above, and shall match TIOH Hard Enamel Color Chip Number listed: TIOH HARD ENAMEL COLOR CHIP NUMBER LOCATION Blue #33 Stylized Center Square NOTES: 1. The term (REF) refers to the measurements taken from the Governmen
5、t furnished hub or die. 2. This item is not authorized for commercial sale, and may be produced only under Government contract and at the request of the Defense Technical Information Center. Custodian: Preparing activity: Army - IH Army - IH (Project No. 8455-2012-080) NOTE: The activities listed ab
6、ove were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Figure 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
