1、 AMSC N/A Page 1 of 3 FSC 8455 INCH - POUND MIL-DTL-11484/348 09 October 2012 DETAIL SPECIFICATION SHEET LAPEL BUTTON, U.S. INTELLIGENCE COMMUNITY AWARD, DIRECTOR OF NATIONAL INTELLIGENCE This specification is approved for use by all Departments and Agencies of the Department of Defense. The require
2、ments for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. DASH NUMBERS: -1 Bronze Award -2 Silver Award -3 Gold Award -4 Two-Tone Award MATERIAL (-1, -2, -3, and -4): Red Brass 85/15 (UNS Alloy No. C-230) Ring shaded gray shall
3、be filled with BLUE #20. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/348 Page 2 of 3 DIMENSIONS: DIAMETER (-1, -2, -3, and -4): 11/16 inch (REF) THICKNESS (at rim): -1, -3: 0.0675 0.010 inch -2, -4: 0.0735 0.010 inch FINISH: -1: Bra
4、ss, Oxidized, Buffed Relieved, Polished Highlights, and shall match The Institute of Heraldry (TIOH) Metal Finish Chip #5. -2: Silver Plated, Oxidized, Buffed Relieved, Matte Finish, Polished Highlights, and shall match TIOH Metal Finish Chip #15. -3: 24K Gold Plated, Matte Finish, Polished Highligh
5、ts, and shall match TIOH Metal Finish Chip #8. -4: SILVER: All rims, outer ring of stars, stars within inner ring, background disc with landmasses, and lettering arched over center insignia shall be Nickel Plated, Matte Finish, and shall match TIOH Metal Finish Chip #17. GOLD: The stars in outer rin
6、g, center insignia (polestar, rose, American eagle, and scroll with inscription at bottom of star) shall be 24K Gold Plated, Matte Finish, Polished Highlights, and shall match TIOH Metal Finish Chip #8. EPOXY: Epoxy enamel shall be applied to the lapel button only as indicated above, and shall match
7、 TIOH Hard Enamel Color Chip Number listed: TIOH HARD ENAMEL COLOR CHIP NUMBER LOCATION Blue #20 Inner Ring of Stars Hard cloisonn enamel may be used in lieu of epoxy. If hard cloisonn enamel is used, the required base material shall be Gilding Metal 95/5 (UNS Alloy C-210). ATTACHING DEVICE: The att
8、aching device shall be a prong with pick and wing type clutch. The prong shall be centered on the reverse side and either fused or hard soldered to the lapel button. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/348 Page 3 of 3 NOTES:
9、 1. The term (REF) refers to measurements taken from the Government furnished hub or die. 2. For -3 and -4, the manufacturer may deviate from MIL-DTL-11484 by using nickel underplating prior to plating with 24K gold. 3. This item is not authorized for commercial sale, and may be produced only under
10、Government contract and at the request of the Office of the Director of National Intelligence. Custodian: Preparing activity: Army - IH Army - IH Civil Agency: (Project No. 8455-2012-118) ODNI - NIAP NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
