1、 AMSC N/A Page 1 of 2 FSC 8455 INCH - POUND MIL-DTL-11484/362 7 August 2013 DETAIL SPECIFICATION SHEET LAPEL BUTTON, OUTSTANDING SERVICE, SCIENTIFIC AND PROFESSIONAL, U.S. ARMY This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for ac
2、quiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230) DIMENSIONS: DIAMETER: 3/4 inch (REF) THICKNESS (At rim): 0.065 inch 0.010 inch FINISH: Brass, Oxidized, Buffed Relieved and shall matc
3、h The Institute of Heraldry (TIOH) Metal Finish Chip Number 4. EPOXY: Epoxy resin shall be applied to the lapel button as indicated above, and shall match TIOH Hard Enamel Color Chip Numbers listed below. Hard cloisonn enamel may be used in lieu of epoxy. If hard cloisonn enamel is used, the require
4、d base material shall be Gilding Metal 95/5 (UNS Alloy C-210). TIOH HARD ENAMEL COLOR CHIP NUMBER LOCATION Red #3 Designation Band RED #3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/362 Page 2 of 2 ATTACHING DEVICE: The attaching de
5、vice shall be a prong with pick and wing type clutch. The prong shall be centered on the reverse side and either fused or hard soldered to the lapel button. ITEM CASE: Lapel buttons to be presented in a case shall be mounted and centered on a polyethylene pad and placed in a rigid hinged plastic box
6、 having a transparent lid and opaque bottom section. The box shall have two plastic hinges and catches and shall be approximately 1-1/8 inches square and 5/8 inch in overall depth. The pad shall be of sufficient depth to restrict movement of the lapel button. NOTES: 1. The term (REF) refers to measu
7、rements taken from the Government furnished hub or die. Custodian: Preparing activity: Army - IH Army - IH (Project No. 8455-2013-182) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
