1、INCH-POUND MIL-DTL-11484/80E 30 September 2008 SUPERSEDING MIL-DTL-11484/80D 27 September 1996 DETAIL SPECIFICATION SHEET LAPEL BUTTON, DISTINGUISHED SERVICE AWARD, DEFENSE CONTRACT AUDIT AGENCY This specification is approved for use by all Departments and Agencies of the Department of Defense. The
2、requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-11484. MATERIAL: Red Brass FINISH: Gold Plated, Matte Finish, Polished on the Wreath and Flame and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8
3、. DIMENSIONS: HEIGHT (overall): 37/64 inch (REF) WIDTH (overall): 1/2 inch (REF) THICKNESS (at thickest point): 0.080 inch + 0.005 inch AMSC N/A PAGE 1 of 2 FSC 8455 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11484/80E Page 2 of 2 NOTES:
4、 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Lapel button shall be lacquered. 3. Attaching device shall be prong with pick and flat ball type clutch. The prong shall be centered on the reverse side and fused or soldered to the lapel button. CHANGES
5、 FROM PREVIOUS ISSUE: The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors
6、are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodian: Preparing activity: Army - IH Army - IH (Project No. 8455-2008-192) Review activities: DLA - CT NOTE: The activities
7、listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
