1、 AMSC N/A FSC 8455 DETAIL SPECIFICATION SHEET INSIGNIA, RANK, CAPTAIN, NAVY AND COLONEL, ARMY, AIR FORCE, AND MARINE CORPS This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of
2、 this specification sheet and the latest version of MIL-DTL-14639. DASH NO. -1: Regular Size, Army and Air Force -2: Miniature Size, Army and Air Force -3: Regular Size, Subdued, Army and Air Force -4: Regular Size, Navy and Marine Corps -5: Miniature Size, Navy and Marine Corps MATERIAL: -1, -2: Re
3、d Brass (UNS Alloy No. C-23000) or Nickel Silver 65/18 (UNS Alloy No. C-75200) -3: Red Brass (UNS Alloy No. C-23000) or Zinc Aluminum (UNS Alloy Nos. Z-33520 or Z-35531) -4, -5: Red Brass or Nickel Silver INCH-POUND MIL-DTL-14639/33C 15 November 2011 SUPERSEDING MIL-DTL-14639/33B 20 January 2004 Pro
4、vided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-14639/33C Page 2 of 3 FINISH: -1, -2: Nickel Plated (Red Brass only), Mirror-like Polished, and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 16. -3: Dull Flat Black, and sh
5、all match TIOH Metal Finish Number 21. -4, -5: Nickel Plated (Red Brass only), Rhodium Plated, Mirror-like Polished. DIMENSIONS: HEIGHT (overall): -1, -3, -4: 3/4 inch (REF) -2, -5: 1/2 inch (REF) WIDTH (overall): -1, -3, -4: 1-1/2 inches (REF) -2, -5: 31/32 inch (REF) THICKNESS (on shield): -1, -3:
6、 0.100 inch 0.010 inch -2: 0.080 inch 0.010 inch -4: 0.100 inch 0.005 inch -5: 0.080 inch 0.005 inch ATTACHING DEVICE: -1, -3, -4: Shall be prong and clutch type. Prongs shall be located on the horizontal center line 1/8 inch 1/64 inch below the top of the wings, equidistant from each end and 1 inch
7、 1/64 inch apart. -2, -5: Shall be prong and clutch type. Prongs shall be located on the horizontal center line 1/16 inch 1/64 inch below the top of the wings, equidistant from each end and 5/8 inch 1/64 inch apart. NOTES: 1. The term (REF) refers to the measurements taken from the Government furnis
8、hed hub or die. 2. -1, -3, -4 shall be dapped in the horizontal plane along a 4 inch 1/64 inch radius. 3. Insignia are to be made and packaged in pairs with one eagle facing right and one eagle facing left. 4. Navy and Marine Corps insignia may be made from sterling silver for commercial sale and, i
9、f so, the thickness dimensions are for reference only. A minimum weight of 52 grains for -4 and 18 grains for -5 shall govern. The finish shall be mirror-like polished. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-14639/33C Page 3 of 3 CHA
10、NGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - IH Army - IH Air Force - 11 Navy - NU Review activities: (Project No. 8455-2011-067) Navy - MC DL
11、A - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
