1、INCH-POUND MIL-DTL-15665/107 30 June 2008 DETAIL SPECIFICATION SHEET INSIGNIA, COLLAR, ACQUISITION CORPS, ARMY This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specif
2、ication sheet and the latest issue of MIL-DTL-15665. DASH NO. -1: Regular -2: Subdued MATERIAL: Red Brass FINISH: -1: 24K Gold Plated, Matte Finish, Polished Highlights and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. -2: Dull Flat Black Chip Number 21 or Dull Flat Brown
3、Chip Number 22. DIMENSIONS: HEIGHT: 1 inch 1/64 inch REF THICKNESS: 0.085 inch 0.005 inch REF AMSC N/A 1 of 2 FSC 8455 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15665/107 NOTES: 1. The term (REF) refers to measurements taken from the Go
4、vernment furnished hub or die. 2. Attaching device shall be prong and clutch type. Two prongs shall be located on the reverse on the vertical center line located equidistant from each end 5/8 inches 1/64 inch apart. 3. Insignia for -1 may be manufactured for commercial sale only using 22 karat gold
5、plate with nickel underplating and matte finish, polish highlights and shall match TIOH Metal Finish Chip Number 11. Custodian: Preparing activity: Army - IH Army - IH (Project No. 8455-2008-144) Review activities: DLA - CT NOTE: The activities listed above were interested in this document as of the
6、 date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. 2 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
