1、AMSC N/A Page 1 of 2 FSC 8455 INCH-POUND MIL-DTL-3628/121A 15 July 2009 SUPERSEDING MIL-DTL-3628/121 15 November 1996 DETAIL SPECIFICATION SHEET BADGE, IDENTIFICATION, SECURITY FORCES, AIR FORCE This specification is approved for use by all Departments and Agencies of the Department of Defense. The
2、requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3628. DASH NO. -1: Regular Size -2: Miniature Size MATERIAL: Red Brass FINISH: Nickel Plated, Mirror-like Polished and shall match The Institute of Heraldry (TIOH) Metal
3、Finish Chip Number 16. DIMENSIONS: HEIGHT (Overall): -1: 2-9/16 inches (REF) -2: 1-11/16 inches (REF) WIDTH (Overall): -1: 1-5/8 inches (REF) -2: 1-1/16 inches (REF) THICKNESS (Cloud above Eagles Head): 0.065 inch + 0.010 inch Provided by IHSNot for ResaleNo reproduction or networking permitted with
4、out license from IHS-,-,-MIL-DTL-3628/121A Page 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The attaching device shall be prong and clutch type. One prong shall be located on the vertical center line above the eagles head. Two prongs
5、shall be located on a horizontal line, 1/2 inch + 1/32 inch above the bottom edge, equidistant from each end and 3/4 inch + 1/64 inch apart. 3. Badges shall be numbered consecutively with the number specified in the procurement document. Numbers shall be 3/32 inch + 1/64 inch high for Dash No. -1 an
6、d 1/16 inches + 1/64 inch high for Dash No. -2, equally spaced and aligned in an arc within the unembossed area provided in the lower obverse side. 4. A full forcer shall be used to bring up the design. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes
7、 with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Air Force 11 (Project No. 8455-2009-095) Review activities: Air Force - 99 DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
