1、AMSC N/A Page 1 of 3 FSC 8455 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, EXCELLENCE IN COMPETITION, RIFLE AND PISTOL U.S. ARMY, PENDANT, SUSPENSION BAR AND SUSPENSION DEVICE This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for
2、 acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3628. -5, -6 -9, -10 -11, -12 -1, -2 -3, -4 -7, -8 DASH NO: -1: Rifle, Silver, National and All Army Matches -2: Rifle, Bronze, Army Area Matches -3: Pistol Silver, National and All Army
3、 Matches -4: Pistol, Bronze, Army Area Matches -5: Pendant, Silver, National and All Army Matches -6: Pendant, Bronze, Army Area Matches -7: Suspension, Bar, Silver, National and All Army Matches -8: Suspension, Bar, Bronze, Army, Area, Matches -9: Badge, Clasp, Rifle, Silver, National and All Army
4、Matches -10: Badge, Clasp, Rifle, Bronze, Army Area Matches -11: Badge, Clasp, Pistol, Silver, National and All Army Matches -12: Badge, Clasp, Pistol Bronze, Army Area Matches INCH-POUND MIL-DTL-3628/13G 4 March 2013 SUPERSEDING MIL-DTL-3628/13F 1 June 1998 Provided by IHSNot for ResaleNo reproduct
5、ion or networking permitted without license from IHS-,-,-MIL-DTL-3628/13G Page 2 of 3 MATERIALS: Red Brass 85/15 (UNS Alloy No.C-230) FINISH: OBVERSE: -1, -3, -5, -7, -9, -11: Nickel Plated, (C-230 only) Silver Plated, Oxidized, Buffed Relieved, Matte Finish with reverse and edge clean and shall mat
6、ch The Institute of Heraldry (TIOH) Metal Finish Chip Number 14. -2, -4, -6, -8, -10, -12: Brass, Oxidized, Buffed Relieved and shall match TIOH Metal Finish Chip Number 4. REVERSE: -1, -3, -5, -7, -9, -11: Nickel Plated, Silver Plated, Matte Finish and shall match TIOH Metal Finish Chip Number 12.
7、-2, -4, -6, -8, -10, -12: Brass, Matte Finish and shall match TIOH Metal Finish Chip Number 2 DIMENSIONS: HEIGHT (Overall): -1, -2, -3, -4: 2-1/4 inches (REF) -5, -6: 1-1/4 inches (REF) -7, -8: 11/32 inch (REF) -9, -10, -11, -12: 19/32 inch (REF) WITDTH (Overall): 1-1/4 inches (REF) THICKNESS (At ri
8、m): 0.060 inch + 0.010 inch -1 thru -6: 0.105 inch + 0.010 inch -7, -8: 0.075 inch + 0.010 inch -9, -11: 0.080 inch + 0.010 inch -10,-12: 0.080 inch + 0.010 inch ATTACHING DEVICE AND LUGS: 1. All lugs are integral. 2. Lugs shall be 0.030 inch + 0.010 inch - 0 in thickness and shall be made with the
9、same material and finish as the pendant and suspension bar. 3. -5, -6, -7 and -8 shall be furnished with two jump ring links attached. Links shall be 13/64 inch + 1/64 inch in width and 1/4 inch + 1/64 inch in length and shall be fabricated from 0.044 inch + 0.005 inch diameter wire. The links shall
10、 be made with the same material and finish as the pendant and suspension bar. 4. The attaching device shall be prong and clutch type. The prongs shall be located on the horizontal center line of the bar equidistant from each end and 3/4 inch + 1/64 apart. NOTES: The term (REF) refers to the measurem
11、ents taken from the Government furnished hub or die. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted without lic
12、ense from IHS-,-,-MIL-DTL-3628/13G Page 3 of 3 Custodian: Preparing activity: Army - IH Army - IH Review activity: (Project No. 8455-2013-107) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
