1、I NOT MEASUREMENT SENSITIVE I MIL-DTL-3628/134 35 No vember 1996 SUPERSEDING 21 September 1994 . MIL-B-41809/46A DETAIL SPECIFICATION SHEET BADGE, IDENTIFICATION, COMMANDANTS STAFF, COAST GUARD This specification is approved for use by all Departments and Agencies of the Department of Defense. The r
2、equirements for acquiring the product described herein shall consist of this specification sheet and the issue of MIL-DTL-3628 listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation. MATERIAL : BASE: Red Brass DEVICE: Gilding Me
3、tal DASH NO. -1: Regular Size -2: Miniature Size FINISH : BASE: Gold Plated, Matte Finish, Polished Highlights and shall match TIOH Metal Finish Chip Number 8. match TIOH Metal Finish Chip Number 16. DEVICE: Hard Enameled, Nickel Plated, Mirror-like Polished and shall AMSC N/A FSC 8455 DISTR IBUTION
4、 STATEMRNT A . Approved for public release; distribution is unlimited. 1 of 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3b28/L34 9999906 2024779 487 = MIL-DTL-3628/134 DIMENSIONS: WIDTH (Point to Point) : BASE : -1: 2-1/4 inches (5.72 c
5、m). REF -2: 1-1/2 inches (3.81 cm) REF -1: 7/8 inch (2.22 cm) REF -2: 9/16 inch (1.43 cm) REF DEVICE : THICKNESS : BASE (Rope Edge) : -1: 0.085 inch f 0.010 inch (0.216 cm f 0.025 cm) -2: 0.070 inch f 0.010 inch (0.178 cm f 0.025 cm) -1: 0.060 inch & 0.010 inch (0.152 cm f 0.025 Cm) -2: 0.050 inch 0
6、.010 inch (0.127 cm f 0.025 cm) DEVICE : OVEFALL THICKNESS (At Thickest Point): -1: 0.150 inch f 0.010 inch (0.381 cm & 0.025 cm) -2: 0.120 inch i 0.010 inch (0.305 cm k 0.025 cm) NOTES : Government furnished hub or die. 1. The term (REF) refers to the measurements taken from the 2. Enameled areas s
7、hall be as indicated. The blue color used in the The red lettering, inner and outer circles on the device and the top of the shield shall conform to the TIOH chip number 18 or the standard sample. color used in the vertical bars and outline of the shield shall conform to the TIOH chip number 1 or th
8、e standard sample. 3. Epoxy resin (stoning epoxy) may be used in lieu of hard enamel at the option of the manufacturer. 4. The device shall be superimposed and secured to the base by rivets or soft solder as shown. When hard enamel is used on the device, the device shall be soft soldered or riveted
9、to the center platform of the base. attached by using rivets. Two rivets shall be soldered or electronically fused on the vertical center line and 5/16 inch i 1/64 inch (0.79 cm f 0.04 cm) on centers for Dash -1 and one rivet shall be soldered or electronically fused in the center of the device for
10、Dash -2. When epoxy. resin is used on the device, the device shall be 5. The attaching device shall be prong aIid clutch type. Three prongs shall be located on a 1-3/4 inch i 1/64 inch (4.45 cm 2 0.04 cm) diameter circle for Dash No. -1 and 1-1/8 inch f 1/64 inch (2.86 cmf 0.04 cm) diameter circle f
11、or Dash No. -2. Each prong shall be spaced 120 degrees apart with the top prong located on the vertical center line at the top of the badge. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to .the extent of the
12、changes. 2 of 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-a HIL-DTL-3628/L34 m 0b 202Ll80 LTO m MLL-DTL-3628/134 Custodian: Amy - IH Coast Guard - CG Review activities: DLA - CT Preparing activity: Army - IH (Project No. 8455-0866) 3 of 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
