1、MIL-DTL-3b28/135 W 9999906 2025039 551 = DETAIL SPECIFICATION MIL-DTL-3628/135 35 November 1994 SUPERSEDING 30 September 1994 MIL-B-41809/47 SHEET BADGE, IDENTIFICATION, RECRUITING, COAST GUARD This specification is approved for use by all Departments and Agencies of the Department of Defense. The r
2、equirements for acquiring the product described herein shall consist of this specification sheet and the issue of MIL-DTL-3628 listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation. MATERIAL: Red Brass DIMENSIONS: DIAMETER: 1-3
3、1/32 inches (5.00 cm) (REF) THICKNESS (Edge) : 0.080 inch distribution is unlimited. 1 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-362/It35 9Ob 2025040 273 = MIL-DTL-3628/135 NOTES : Government furnished hub or die. 1. The term (REF)
4、 refers to the measurements taken from the 2. Enameled areas shall be as indicated. The color shall conform to the TIOH chip numbers listed below or the standard sample. CQLQR Red Blue White aLmmm 1 - Shield Stripes 18 - Disk Background, S,hield Bar 28 - Anchor, Shield Background 3. Epoxy resin (sto
5、ning epoxy) may be used in lieu of hard enamel at , the option of the manufacturer. 4. The badge shall be spherically dapped 3/32 inch.* 1/16 inch (0.24 cm i 0.16 cm) when measured on the reverse side. 5. Attaching device shall be prong and clutch type. Three prongs shall be located on a i-i/2 inch
6、* 1/64 inch (3.81 cm i 0.04 cm) diameter circle. the vertical center line at the top of the badge. Each prong shall be 120 degrees apart with one prong located on CHpGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Army - IH Coast Guard - CG Preparing activity: . Army - IH Review activities: DLA - CT (Project No. 8455-0866) 2 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-