1、NOT MEASUREMENT SENSITIVE MIL-DTL-3628/147 15 November i996 SUPERSEDING MIL-B -4 18 O 91 3 8B 21 September 1994 DETAIL SPECIFICATION SHEET BADGE, IDENTIFICATION, CHIEF OF PARTY, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION This specification is approved for use by all Departments and Agencies of
2、the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of MIL-DTL-3628 listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation. MATERIAL: Red
3、 Brass DIMENSIONS: LENGTH (Each Side): -1: 1-5/16 inches (3.33 cm) (REF) -2: 21/32 inch (1.67 cm) (REF) DASH NO. -1: Regular Size -2: Miniature Size THICKNESS (At Thickest Point) : -1: 0.155 inch distribution is unlimited. 1 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted w
4、ithout license from IHS-,-,-MIL-DTL-3b28/L47 9999906 2025LbL 989 MIL-DTL-3628/147 NOTES : Government furnished hub or die. 1. The term (REF) refers to the measurements taken from the 2. The attaching device shall be prong and clutch type. For Dash No. -1, three prongs shall be located 3/16 inch -c 1
5、/64 inch (0.48 cm & 0.04 cm) in from each tip. For Dash No. -2, two prongs shall be located on the vertical center line, equidistant from each end and 3/8 inch f 1/64 inch (0.95 cm & 0.04 cm) apart. CHANGES,FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Amy - IH Review activities: DLA - CT Preparing activity: Army - IH (Project No. 8455-0866) 2 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
