1、AMSC N/ A 1 of 2 FSC 8455DISTRIBUTION STATEMENT A . Approved for public release; distribution is unlimited.INCH-POUNDMIL-DTL-3628/21224 April 2001DETAIL SPECIFICATION SHEETBADGE, QUALIFICATION, AVIATION, AIR BATTLE MANAGER, SENIOR, AIR FORCEInactive for new design after 24 April 2001.This specificat
2、ion is approved for use by all Departments and Agenciesof the Department of Defense.The requirements for acquiring the product described herein shall consist of thisspecification sheet and the issue of MIL-DTL-3628 listed in that issue of the Department ofDefense Index of Specifications and Standard
3、s ( DoDISS) specified in the solicitation.DASH NO.-1: Regular SizeMATERIAL: Red Brass or Nickel Silver -2 : Miniature SizeFINISH: Nickel Plated (Red Brass only), Mirror-like Polished and shall match TIOH MetalFinish Chip Number 16.DIMENSIONS:HEIGHT (overall):-1: 1-3/16 inches (REF)-2: 25/32 inch (RE
4、F)WIDTH (overall):-1: 3 inches (REF)-2: 2 inches (REF)THICKNESS (at thickest point of wings):-1: 0.130 inch + 0.005 inch-2: 0.095 inch + 0.005 inchProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/2122 of 2NOTES:1. The term (REF) refers to
5、 measurements taken from the Government furnished hubor die.2. Attaching device shall be prong and wing-type clutch. The prongs shall be locatedon the horizontal center line, equidistant from each end and the following distance apart.Dash -1 : 2 inches 1/32 inchDash -2 : 1-1/2 inches 1/32 inch3. A m
6、ock forcer may be used to bring up the design of the shield and ridge line of thewings only.4. Piercing shall be as indicated.Custodian: Preparing activity:Army - IH Army - IHAir Force - 11Review activities: (Project No. 8455-0045/002)Air Force - 99DLA - CTProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
