1、INCH-POUND MIL-DTL-3628/230A 15 August 2008 SUPERSEDING MIL-DTL-3628/230 29 October 2003 DETAIL SPECIFICATION SHEET BADGE, OCCUPATIONAL, LOGISTICS READINESS, AIR FORCE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring
2、the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3628. BASIC SENIOR MASTER DASH NO. -1: Basic, Regular Size -4: Basic, Mid Size -2: Senior, Regular Size -5: Senior, Mid Size -3: Master, Regular Size -6: Master, Mid Size MATERIAL: Red Brass or Nic
3、kel Silver FINISH: Nickel Plated (Red Brass only), Mirror-like Polished and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 16. DIMENSIONS: HEIGHT (overall): -1: 13/16 inch (REF) -2: 1-3/16 inches (REF) -3: 1-3/16 inches (REF) -4: 21/32 inch (REF) -5: 29/32 inch (REF) -6: 29/32
4、 inch (REF) AMSC N/A Page 1 of 2 FSC 8455 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/230A Page 2 of 2 WIDTH (overall): -1 to -3: 1-5/8 inches (REF) -4 to -6: 1-9/32 inches (REF) THICKNESS (at thickest point): -1 to -3: 0.095 0.010 i
5、nch -4 to -6: 0.095 0.010 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Piercing shall be as indicated for both regular and mid size badges except that the mid-size master badge (-6) shall not be pierced around the wreath and the star. 3.
6、 Attaching device shall be prong and clutch type. Two prongs shall be located at each intersection of the horizontal center line of the badge and the center of each side of the wreath. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to t
7、he previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Air Force 11 (Project No. 8455-2008-161) Review activities: DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
