1、 AMSC N/A Page 1 of 2 FSC 8455 INCH-POUND MIL-DTL-3628/235A 20 November 2009 SUPERSEDING MIL-DTL-3628/235 21 December 2004 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, CUTTERMAN, COAST GUARD AUXILIARY This specification is approved for use by all Departments and Agencies of the Department of Def
2、ense. The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3628. ASSEMBLED DEVICE BASE MATERIAL: Red Brass FINISH: BASE (Stylized Waves): Oxidized, Relieved, and shall match The Institute of Heraldry (TIOH) Metal Finish
3、 Chip Number 4. DEVICE (Disk with Anchors): Enameled/Epoxied, Nickel Plated, Silver Plated, Relieved, Matte Finished, and shall match TIOH Metal Finish Chip Number 14. DIMENSIONS: HEIGHT (overall): 5/8 inch (REF) WIDTH (overall): 2-9/16 inch (REF) THICKNESS (at thickest point): BASE: 0.095 0.010 inc
4、h DEVICE: 0.085 0.010 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/235A Page 2 of 2 2. The device shall be superimposed on the ba
5、se (as shown) and secured by two rivets located on the vertical center of the device or by soft solder. 3. Outer ring of device which surrounds center disk with shield shall be filled with enamel or epoxy conforming to TIOH Hard Enamel Color Chip Number 20. 4. Attaching device shall be prong and win
6、g type clutch. Two prongs shall be located on the reverse on the horizontal center line, equidistant from each end and 1-1/4 inches 1/64 inch apart. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent
7、of the changes. Custodians: Preparing activity: Army - IH Army - IH (Project No. 8455-2010-017) Review activities: DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
