1、AMSC N/A Page 1 of 2 FSC 8455 INCH-POUND MIL-DTL-3628/248A 3 September 2013 SUPERSEDING MIL-DTL-3628/248 15 February 2009 DETAIL SPECIFICATION SHEET BADGE, OCCUPATIONAL, CYBERSPACE OPERATOR, U.S. AIR FORCE This specification is approved for use by all Departments and Agencies of the Department of De
2、fense The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3628. B A S I C S E NI O R M A S T E RP I E R C E D P I E R C E DDASH NO: -1: Basic, Regular Size -4: Senior, Miniature Size -2: Basic, Miniature Size -5: Maste
3、r, Regular Size -3: Senior, Regular Size -6: Master, Miniature Size MATERIAL: Red Brass 85/15 (UNS Alloy C-230) FINISH: Nickel Plated Mirror-like Polished and shall match The Institute of Heraldry Metal Finish Chip Number 16. DIMENSIONS: HEIGHT (Overall): -1: 7/8 inch (REF) -4: 3/4 inch (REF) -2: 9/
4、16 inch (REF) -5: 1-1/8 inch (REF) -3: 1-1/8 inch (REF) -6: 3/4 inch (REF) WIDTH (Overall): -1, -3, -5: 3 inches (REF) -2, -4, -6: 2 inches (REF) THICKNESS (At thickest point): -1, -3, -5: 0.135 0.010 inch -2, -4, -6: 0.100 0.010 inch Provided by IHSNot for ResaleNo reproduction or networking permit
5、ted without license from IHS-,-,-MIL-DTL-3628/248A Page 2 of 2 ATTACHING DEVICE: 1. Attaching device shall be prong and clutch type. 2. Two prongs shall be located on the reverse on the horizontal center line The prongs shall be located on the horizontal center line, equidistant from each end 1-3/8
6、inches + 1/32 inch apart on -1, -2, -3 and 1-1/16 inches + 1/32 inch apart on -4, -5, -6. NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Piercing shall be as indicated for Regular size badges between the star and globe on the Senior and Master
7、and between the star and wreath on the Master, no piercing on Minis. CHANGES FROM PREVIOUS ISSUE: The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability
8、whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - IH Army - IH
9、Air Force - 11 Review activities: (Project No. 8455-2013-185) Air Force - 99 DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
