1、INCH-POUND MIL-DTL-3628/25210 January 2009 DETAIL SPECIFICATION SHEET BADGE, OCCUPATIONAL, FORCE SUPPORT, OFFICERS BASIC, SENIOR, MASTER GRADES, AIR FORCE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product d
2、escribed herein shall consist of this specification sheet and the latest issue of MIL-DTL-3628. PIERCED PIERCED PIERCEDPIERCED PIERCED PIERCEDBASIC SENIOR MASTERDASH NO: -1 Basic, Regular Size -4 Basic, Mid Size -2 Senior, Regular Size -5 Senior, Mid Size -3 Master, Regular Size -6 Master, Mid Size
3、MATERIAL: Red Brass FINISH: Nickel Plated Mirror-like Polished and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 16. DIMENSIONS: HEIGHT (overall): -1: 3/4 inch (REF) -4: 9/16 inches (REF) -2: 1-1/8 inch (REF) -5: 7/8 inch (REF) -3: 1-1/8 inch (REF) -6: 7/8 inch (REF) WIDTH (o
4、verall): -1: 1-5/8 inches (REF) -4: 1-1/4 inches (REF) -2: 1-5/8 inches (REF) -5: 1-1/4 inches (REF) -3: 1-5/8 inches (REF) -6: 1-1/4 inches (REF) AMSC N/A Page 1 of 2 FSC 8455 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/252 Page 2 o
5、f 2 THICKNESS (at thickest point): -1, -2, -3: 0.095 0.010 inch -4, -5, -6: 0.080 0.010 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Attaching device shall be prong and clutch type. Two prongs shall be located on the reverse on the horiz
6、ontal center line. The prongs shall be located equidistant from each end 1-3/8 inches + 1/64 inch apart on regular size, 1- 1/16 inches + 1/64 inch apart on miniature size. 3. Piercing shall be as indicated for both Regular and Mid size badges with the exception of the Master Mid size having no pier
7、cing in the areas between the star and wreath. Custodian: Preparing activity: Army - IH Army - IH Air Force - 11 (Project No. 8455-2009-032) Review activities: Air Force - 99 DLA CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
