1、AMSC N/A Page 1 of 2 FSC 8455 INCH-POUND MIL-DTL-3628/253 15 November 2009 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, UNMANNED AIRCRAFT SYSTEMS BASIC, SENIOR, MASTER GRADES, AIR FORCE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requi
2、rements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3628. BASIC SENIOR MASTER DASH NO: MATERIAL: Red Brass or Nickel Silver FINISH: Nickel Plated (Red Brass only),Mirror-like Polished and shall match The Institute of Heraldry (
3、TIOH) Metal Finish Chip Number 16. DIMENSIONS: HEIGHT (overall): -1 Basic, Regular Size -4 Basic, Miniature Size -2 Senior, Regular Size -5 Senior, Miniature Size -3 Master, Regular Size -6 Master, Miniature Size -1: 7/8 inch (REF) -4: 5/8 inch (REF) -2: 1-3/16 inch (REF) -5: 25/32 inch (REF) -3: 1-
4、1/4 inch (REF) -6: 27/32 inch (REF) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/253 Page 2 of 2 WIDTH (overall): -1: 3 inches (REF) -4: 2 inches (REF) -2: 3 inches (REF) -5: 2 inches (REF) -3: 3 inches (REF) -6: 2 inches (REF) THICKN
5、ESS (at thickest point): -1: 0.132 inch + 0.005 inch -4: 0.098 inch + 0.005 inch -2: 0.150 inch 0.005 inch -5: 0.122 inch + 0.005 inch -3: 0.156 inch + 0.005 inch -6: 0.118 inch + 0.005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Attach
6、ing device shall be prong and clutch type. Two prongs shall be located on the reverse on the horizontal center line. The prongs shall be located equidistant from each end 1-3/8 inches + 1/64 inch apart on regular size, 1- 1/16 inches + 1/64 inch apart on miniature size. 3. Piercing shall be as indic
7、ated. Custodian: Preparing activity: Army - IH Army - IH Air Force - 11 (Project No. 8455-2010-007) Review activities: Air Force - 99 DLA CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
