1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, COMBAT AND SPECIAL SKILL, RIGGER U.S. ARMY This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein shall consist of t
2、his specification sheet and the latest issue of MIL-DTL-3628. DASH NO. -1: Regular Size -2: Miniature Size -3: Regular Size, Subdue MATERIAL: (-1, -2, and -3) Red Brass 85/15 (UNS Alloy No. C-230) or Nickel Silver 65/15 (UNS Alloy C-752) FINISH: -1, -2: Nickel Plated (C-230 only) , Silver Plated, Ox
3、idized, Buffed Relieved, Matte Finish and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 14. -3: Dull Flat Black Enamel Finish and shall Match TIOH Metal Finish Chip Number 21. DIMENSIONS: HEIGHT (Overall): -1, -3: 11/16 inch (REF) -2: 3/8 inch (REF) WIDTH (Overall): -1, -3: 1
4、-3/4 Inches (REF) -2: 1 Inch (REF) INCH-POUND MIL-DTL-3628/69D 14 February 2013 SUPERSEDING MIL-DTL-3628/69C 15 November 1996 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/69D Page 2 of 2 THICKNESS: (Minimum forced area): 0.035 inch +
5、0.005 inch OVERALL DEPTH (Including forced area): -1, -3: 0.095 inch + 0.005 inch -2: 0.070 inch + 0.005 inch FORCER AND ATTACHING DEVICE: 1. A full forcer shall be used to bring up the canopy and ridge line of the wings. 2. The attaching device shall be prong and clutch type. 3. The prongs shall be
6、 located on the horizontal center line equidistant from each end and 1-1/4 inch + 0 - 1/8 inch apart for regular size badges and 3/4 inch + 0 - 1/8 inch apart for dress miniature size badges. NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. -1 an
7、d -2 may be nickel or rhodium plated with a mirror-like polished finish which shall match TIOH Metal Finish Chip Number 16 for commercial sale only. For nickel or rhodium plated items, the silver plating requirements shall not apply. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in th
8、is revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army IH Review activity: (Project No. 8455-2013-103) DLA CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
