1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, TACTICAL AIR CONTROL PARTY, U.S. AIR FORCE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of
2、this specification sheet and the latest issue of MIL-DTL-3628. MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230) or Nickel Silver 65/18 (UNS Alloy No. C-752) DIMENSIONS: HEIGHT: 1-23/64 inches (REF) WIDTH: 1-9/32 inches (REF) THICKNESS (Across center): 0.125 inch 0.010 inch INCH-POUND MIL-DTL-3628/70E
3、 2 November 2012 SUPERSEDING MIL-DTL-3628/70D 15 November 1996 BLACK #26 BLACK #26 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/70E Page 2 of 2 PIERCING: All piercings shall be as indicated above. FINISH: Nickel Plated, Mirror-like Po
4、lished and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 16. EPOXY: Hard epoxy enamel shall be applied to the badge as indicated above, and shall match TIOH Hard Enamel Color Chip Number listed below. Hard cloisonn enamel may be used in lieu of epoxy. If hard cloisonn enamel
5、is used, the required base material shall be Gilding Metal 95/5 (UNS Alloy C-210). TIOH HARD ENAMEL COLOR CHIP NUMBER LOCATIONS Black #26 (1) Top Designation Scroll (2) Bottom Designation Scroll ATTACHING DEVICE: The attaching device shall be prong and clutch type. The prongs shall be located on the
6、 horizontal center line and centered on each wing. NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. A mock forcer may be used to bring up the detail on the wings. CHANGES FROM PREVIOUS ISSUE: The margins of this specification are marked with vert
7、ical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the ent
8、ire content irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - IH Army - IH Air Force - 11 Review activity: (Project No. 8455-2012-160) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
