1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET DECORATION, DISTINGUISHED SERVICE MEDAL, U.S. PUBLIC HEALTH SERVICE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist
2、of this specification sheet and the latest issue of MIL-DTL-3943. DASH NO. -1: Regular Size -2: Miniature Size MATERIAL: Red Brass FINISH: 24K Gold Plated, Matte Finish, Polished Highlights and shall match The Institute of Heraldry (TIOH) Metal Chip Number 8. INCH-POUND MIL-DTL-3943/111E 15 March 20
3、10 SUPERSEDING MIL-DTL-3943/111D 15 January 2008 OBVERSE Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/111E Page 2 of 2 DIMENSIONS: HEIGHT (including lug): -1: 1-1/2 inches (REF) -2: 3/4 inch (REF) DIAMETER: -1: 1-3/8 inches (REF) -2:
4、11/16 inch (REF) THICKNESS (at edge): -1: 0.125 inch + 0.005 inch -2: 0.075 inch + 0.005 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The reverse side shall be flat and suitable for engraving. 3. Decoration set shall consist of a regular
5、 size medal, a service ribbon and a lapel button all packaged in a presentation case conforming to MIL-C-14633, Type XVI with a Type XVI, Class 1 or 3 pad. 4. The ribbon for the pendant drape and service ribbon shall conform to MIL-DTL-11589/298. 5. The lapel button shall conform to MIL-DTL-11484/14
6、2. 6. This item is not authorized for commercial sale, and may be produced only under Government contract. A copy of the original purchase order from the Government Agency concerned must accompany all written requests prior to the loan of a Government hub or die. CHANGES FROM PREVIOUS ISSUE: The mar
7、gins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the
8、 requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - IH Army - IH Review activities: (Project No. 8455-2010-103) DLA - CT NOTE: The activities listed above were interested
9、 in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
