1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET DECORATION, AERIAL ACHIEVEMENT MEDAL, CIVILIAN, AIR FORCE This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this sp
2、ecification sheet and the latest issue of MIL-DTL-3943. MATERIAL: Nickel Silver FINISH: Silver Plated, Oxidized, Buffed Relieved, Matte Finish and shall match The Institute of Heraldry (TIOH) Metal Finish Chip number 14. DIMENSIONS: HEIGHT (including lug): 1-3/4 inches (REF) WIDTH (overall): 1-3/4 i
3、nches (REF) THICKNESS (at wing tips): 0.125 inch + 0.010 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. INCH-POUND MIL-DTL-3943/166C 19 February 2010 SUPERSEDING MIL-DTL-3943/166B 9 December 1998 OBVERSE REVERSE Provided by IHSNot for ResaleN
4、o reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/166C Page 2 of 2 2. Decoration set shall consist of a regular size medal, a service ribbon, and a lapel button all packaged in a presentation case conforming to MIL-C-14633, Type XVI with a Type XVI, Class 1 or 3 pad. 3
5、 The ribbon for the pendant drape and service ribbon shall conform to MIL-DTL-11589/390. 4. The lapel button shall conform to MIL-DTL-11484/225. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of
6、the changes. Custodians: Preparing activity: Army - IH Army - IH Air Force - 11 Review activities: (Project No. 8455-2010-090) Air Force - 99 DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
