1、 AMSC N/A Page 1 of 3 FSC 8455 DETAIL SPECIFICATION SHEET MEDAL, GOOD CONDUCT, U.S. MARINE CORPS This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet
2、and the latest issue of MIL-DTL-3943. DASH NO. -1: Regular Size -2: Miniature Size INCH-POUND MIL-DTL-3943/209A 26 July 2012 SUPERSEDING MIL-DTL-3943/209 30 June 1997 OBVERSE REVERSE SUSPENSION RIFLE ASSEMBLED OBVERSE ASSEMBLED REVERSE Provided by IHSNot for ResaleNo reproduction or networking permi
3、tted without license from IHS-,-,-Page 2 of 3 MATERIAL (-1 and -2): Red Brass 85/15 (UNS Alloy No. C-230) FINISH (-1 and -2): Brass, Oxidized, Buffed Relieved and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 4. DIMENSIONS: PENDANT: DIAMETER: -1: 1-3/8 inches (REF) -2: 5/8 in
4、ch (REF) THICKNESS (At thickest point): -1: 0.105 inch + 0.010 inch -2: 0.080 inch + 0.010 inch SUSPENSION RIFLE: HEIGHT: (At lug): -1: 1/4 inch (REF) -2: 1/8 inch (REF) WIDTH (Overall): -1: 1-19/32 inches (REF) -2: 51/64 inch (REF) THICKNESS (At thickest point): -1: 0.075 inch + 0.010 inch -2: 0.06
5、0 inch + 0.010 inch SUSPENSION RIFLE & RING: 1. A hole 1/16 inch + 1/64 inch - 0 in diameter shall be drilled through the medal and suspension rifle in the location shown. 2. The pendant ribbon ring for -1 shall be formed from 0.050 inch + 0.002 inch diameter wire and shall have an outside diameter
6、of 9/32 inch + 1/64 inch. 3. The suspension rifle and the pendant for -2 shall be one piece height shall be 1/8 inch and the width shall be 51/64 inch. 4. The width of the opening above the pendant rifle shall be 1-3/8 inches + 1/64 inch -0 for -1 and 11/16 inch + 1/64 inch - 0 for -2. Provided by I
7、HSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/209A Page 3 of 3 NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The specification slash sheet for the ribbon for the pendant drape is MIL-DTL-1158
8、9/69. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - IH Army - IH Navy - MC Review activity: (Project No. 8455-2012-059) DLA -CT NOTE: The ac
9、tivities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
