1、 AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET MEDAL, WORLD WAR I VICTORY This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the late
2、st issue of MIL-DTL-3943. OBVERSE REVERSE DASH NO. -1: Regular Size -2: Miniature Size MATERIAL (-1 and -2): Red Brass 85/15 (UNS Alloy No. C-230) FINISH (-1 and -2): Brass, Oxidized, Buffed Relieved and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 4. INCH-POUND MIL-DTL-3943
3、/236A 10 October 2012 SUPERSEDING MIL-DTL-3943/236 30 June 1997 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/236A Page 2 of 2 DIMENSIONS: DIAMETER: -1: 1-13/32 inches (REF) -2: 23/32 inch (REF) THICKNESS (At thickest point): -1: 0.165
4、 inch + 0.010 inch -2: 0.120 inch + 0.010 inch NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The specification slash sheet for the ribbon for the pendant drape is MIL-DTL-11589/148. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used
5、in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - IH Army - IH Air Force - 11 Navy - NU Review activities: (Project No. 8455-2012-095) Navy - MC, CG1 DLA - CT NOTE: The activities listed above were interes
6、ted in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
