1、 AMSC N/A 1 of 3 FSC 8455 DETAIL SPECIFICATION SHEET DECORATION, NATIONAL INTELLIGENCE CROSS OFFICE OF THE DIRECTOR OF NATIONAL INTELLIGENCE This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein
2、 shall consist of this specification sheet, the latest issue of MIL-DTL-3943, and a request from the Office of the Director of National Intelligence. O B V E R S ED A R K B L U E E P O X Y C H I P # 2 0R E V E R S E DASH NO. -1: Regular Size -2: Miniature Size MATERIAL: Red Brass 85/15 (UNS Alloy C-
3、230) FINISH: Epoxy resin (Stoning epoxy), 24K Gold Plated, Matte Finish, Polished Highlights and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. DIMENSIONS: (Not including Lug) HEIGHT: -1: 1-1/2 inches (REF) -2: 3/4 inch (REF) INCH-POUND MIL-DTL-3943/335A 1 July 2013 SUPERSE
4、DING MIL-DTL-3943/335 20 March 2009 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/335A Page 2 of 3 WIDTH: -1: 1-1/2 inches (REF) -2: 3/4 inch (REF) THICKNESS (at thickest point) -1: 0.185 inch 0.010 inch -2: 0.170 inch 0.010 inch DECOR
5、ATION SET: Decoration set shall consist of a Regular size medal, a Miniature size medal, a Service Ribbon and a Lapel Button. All packaged in a presentation case conforming to MIL-C-14633, Type XVI with a Class 1 or 3 pad. NOTES: 1. The term (REF) refers to the measurements taken from the Government
6、 furnished hub or die. 2. The obverse highlights of the Cross Base shall be polished prior to proper placement of the Sub-Rosa device to the obverse surface of the Base. 3. . The specification slash sheet for the ribbon for the pendant drape and service ribbon is MIL-DTL-11589/619 4. The specificati
7、on slash sheet for the lapel button is MIL-DTL-11484/325. 5. If hard enamel is used then the material will be Gilding Metal 95/5 (UNS Alloy C-210) 6. A copy of the original purchase order form the Office of the Director of National Intelligence must accompany all written requests prior to the loan o
8、f Government hub or die. 7. This item is not authorized for commercial sale, and may be produced only under Government contract and at the request of the Office of the Director of National Intelligence. EPOXY: Epoxy resin shall be applied to the lapel button as indicated above, and shall match TIOH
9、Hard Enamel Color Chip Numbers listed below. TIOH HARD ENAMEL COLOR CHIP COLOR CHIP NUMBER Dark Blue #20 CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Provided by IHSNot for Resal
10、eNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/335A 3 of 3 Custodian: Preparing activity: Army - IH Army - IH Review activity: (Project No. 8455-2013-143) DLA - CT Civil Agency: ODNI - NIAP NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
