1、 AMSC N/A 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET DECORATION, NATIONAL INTELLIGENCE MEDAL FOR VALOR, OFFICE OF THE DIRECTOR OF NATIONAL INTELLIGENCE This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product descr
2、ibed herein shall consist of this specification sheet, the latest issue of MIL-DTL-3943, and a request from the Office of the Director of National Intelligence. O B V E R S E R E V E R S EG R A Y A R E A T O B EB L U E C H I P # 2 0DASH NO. -1: Regular Size -2: Miniature Size MATERIAL: Red Brass 85/
3、15 (UNS Alloy C-230) FINISH: Epoxy resin (Stoning epoxy), 24K Gold Plated, Matte Finish, Polished Highlights and shall match The Institute of Heraldry (TIOH) Metal Finish Chip Number 8. DIMENSIONS: (Not including Lug) HEIGHT: -1: 1-1/2 inches (REF) -2: 3/4 inch (REF) THICKNESS (at thickest point) -1
4、: 0.238 inch 0.010 inch -2: 0.161 inch 0.010 inch DECORATION SET: Decoration set shall consist of a regular size medal, a miniature size medal, a service ribbon, and a lapel button all packaged in a presentation case conforming to MIL-C-14633, Type XV with a Class 4 pad. INCH-POUND MIL-DTL-3943/336
5、14 June 2013 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/336 Page 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. The specification slash sheet for the ribbon for the pend
6、ant drape and service ribbon is MIL-DTL-11589/622 3. The specification slash sheet for the lapel button is MIL-DTL-11484/326. 4. If hard enamel is used then the material will be Gilding Metal 95/5 (UNS Alloy C-210) 5. A copy of the original purchase order form the Office of the Director of National
7、Intelligence must accompany all written requests prior to the loan of Government hub or die. 6. This item is not authorized for commercial sale, and may be produced only under Government contract and at the request of the Office of the Director of National Intelligence EPOXY: Epoxy resin shall be ap
8、plied to the lapel button as indicated above, and shall match TIOH Hard Enamel Color Chip Numbers listed below. TIOH HARD ENAMEL COLOR CHIP COLOR CHIP NUMBER Dark Blue #20 Custodian: Preparing activity: Army - IH Army - IH Review activity: (Project No. 8455-2013-153) DLA - CT Civil Agency: ODNI - NI
9、AP NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
