1、 AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET RIBBON ATTACHMENT, FLEET MARINE FORCE COMBAT INSIGNIA This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein shall consist of this specif
2、ication sheet and the latest issue of MIL-R-41819. MATERIAL: Red Brass 85/15 (UNS Alloy No.C-230) FINISH: Oxidized DIMENSIONS: HEIGHT: 5/16 inch (REF) WIDTH: 5/16 inch (REF) THICKNESS (At thickest point): 0.070 0.010 inch ATTACHMENT DEVICE: 1. The attaching device shall be a staple type prong. 2. Th
3、e prong shall be located on the horizontal center line of the reverse side of the ribbon attachment and shall be centered on the globe. INCH-POUND MIL-DTL-41819/16E 25 February 2013 SUPERSEDING MIL-DTL-41819/16D 30 September 1996 Provided by IHSNot for ResaleNo reproduction or networking permitted w
4、ithout license from IHS-,-,-MIL-DTL-41819/16E 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Piercing shall be as indicated. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect t
5、o the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - IH Army - IH Navy - MC Review activity: (Project No. 8455-2013-118) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
