1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET RIBBON ATTACHMENT, DATE BAR, REPUBLIC OF VIETNAM CAMPAIGN MEDAL This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein shall consist of th
2、is specification sheet and the latest issue of MIL-R-41819. MATERIAL: Red Brass 85/15 (UNS Alloy No.C-230) FINISH: Nickel Plated, Mirror-like Polished and shall match The Institute of Heraldry Metal Finish Chip Number 16. DIMENSIONS: HEIGHT (Overall): 13/64 inch (REF) WIDTH (Overall): 19/32 (REF) TH
3、ICKNESS (At edge): 0.040 0.005 inch ATTACHMENT DEVICE: 1. The attaching device shall be a staple type prong. 2. The prong shall be centered on the reverse side of the ribbon attachment. NOTES: The term (REF) refers to the measurements taken from the Government furnished hub or die. CHANGES FROM PREV
4、IOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. INCH-POUND MIL-DTL-41819/23F 25 February 2013 SUPERSEDING MIL-DTL-41819/23E 30 September 1996 Provided by IHSNot for ResaleNo reproduction or networki
5、ng permitted without license from IHS-,-,-MIL-DTL-41819/23F 2 of 2 Custodians: Preparing activity: Army - IH Army - IH Air Force - 11 Navy - NU Review activities: (Project No. 8455-2013-116) Navy - MC, CG1 DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
