1、 AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET RIBBON ATTACHMENT, BRAVERY U.S. NAVY This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein shall consist of this specification sheet and
2、 the latest issue of MIL-R-41819. MATERIAL: Red Brass 85/15 (UNS Alloy No.C-230) or Nickel Silver 65/15 (UNS Alloy C-752) FINISH: Nickel Plated (C-230 only), Silver Plated, Oxidized, Buffed Relieved, Matte Finish, Polished Highlights (Letters) and shall match The Institute of Heraldry Metal Finish C
3、hip Number 15. DIMENSIONS: HEIGHT: 9/32 inch (REF) WIDTH: 1- 3/8 inches (REF) THICKNESS (On letters): 0.070 0.005 inch ATTACHMENT DEVICE: The attaching device shall be located on the horizontal center line of the ribbon attachment with the prongs equidistant from the edges and 7/8 inch + 1/32 inch a
4、part. NOTES: The term (REF) refers to the measurements taken from the Government furnished hub or die. INCH-POUND MIL-DTL-41819/24E 25 February 2013 SUPERSEDING MIL-DTL-41819/24D 30 September 1996 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-D
5、TL-41819/24E 2 of 2 CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Review activity: (Project No. 8455-2013-117) DLA - CT NOTE: Th
6、e activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
