1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET RIBBON ATTACHMENT, HEROISM WREATH This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein shall consist of this specification sheet and the
2、 latest issue of MIL-R-41819. DASH NO. -1: Regular Size -2: Miniature Size MATERIAL: (-1 and -2) Red Brass 85/15 (UNS Alloy No.C-230) FINISH: (-1 and -2) 24K Gold Plated, Matte Finish, Polished Highlights and shall match The Institute of Heraldry Metal Finish Chip Number 8. INCH-POUND MIL-DTL-41819/
3、27D 8 February 2013 SUPERSEDING MIL-DTL-41819/27C 1 November 1994 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-41819/27D Page 2 of 2 DIMENSIONS: DIAMETER: 1: 1/2 inch (REF) -2: 5/16 inch (REF) THICKNESS (At bow): -1: 0.050 0.005 inch -2: 0
4、.045 0.005 inch ATTACHMENT DEVICE: 1: The attaching device shall be two prongs. 2: One prong shall be located at each intersection of the horizontal center line and the center of the wreath. NOTES: The term (REF) refers to the measurements taken from the Government furnished hub or die. CHANGES FROM
5、 PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Review activity: (Project No. 8455-2013-109) DLA - CT NOTE: The activities listed above were i
6、nterested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
