1、 AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET RIBBON ATTACHMENT, LONG SERVICE MEDAL, U.S. BORDER PATROL This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the product described herein shall consist of this sp
2、ecification sheet and the latest issue of MIL-R-41819. DASH NO. -1: Regular Size -2: Miniature Size MATERIAL: (-1 and -2) Red Brass 85/15 (UNS Alloy No.C-230) FINISH: (-1 and -2) Nickel Plated, Silver Plated, Oxidized, Relieved, Polished Highlights and shall match The Institute of Heraldry (TIOH) Me
3、tal Finish Chip Number 15. DIMENSIONS: HEIGHT: -1: 1/8 inch (REF) -2: 1/16 inch (REF) WIDTH: -1: 1-3/8 inches (REF) -2: 11/16 inch (REF) THICKNESS (At thickest point): -1: 0.082 0.005 inch -2: 0.070 0.005 inch INCH-POUND MIL-DTL-41819/44A 11 February 2013 SUPERSEDING MIL-DTL-41819/44 18 July 2001 Pr
4、ovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-41819/44A 2 of 2 ATTACHMENT DEVICE: Attaching device shall be 2 prongs located on the reverse side of the ribbon attachment, 1/32 inch from each end. NOTES: The term (REF) refers to the measuremen
5、ts taken from the Government furnished hub or die. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Review activity: (Project No. 8
6、455-2013-090) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
