1、 AMSC N/A Page 1 of 3 FSC 8455 DETAIL SPECIFICATION SHEET RIBBON ATTACHMENT, CLASP, CAMPAIGN AND SERVICE MEDAL FOR U.S. NAVY, U.S. MARINE CORPS AND U.S. COAST GUARD This specification is approved for use by all Departments and Agencies of the Department of Defense The requirements for acquiring the
2、product described herein shall consist of this specification sheet and the latest issue of MIL-R-41819. DASH NO. -1: Regular size -2: Miniature Size MATERIAL: (-1 and -2) Red Brass 85/15 (UNS Alloy No.C-230) FINISH: (-1 and -2) Brass, Matte Finish, Polished Highlights and shall match The Institute o
3、f Heraldry Metal Finish Chip Number 3. INCH-POUND MIL-DTL-41819/9F 25 February 2013 SUPERSEDING MIL-DTL-41819/9E 30 November 1996 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-41819/9F 2 of 3 DASH NO. TITLE, REGULAR SIZE USER -1: AISNE A, N
4、 MC -2: AISNE-MARNE A, N, MC -3: CAMBRAI A -4: CHAMPAGNE-MARNE A -5: LYS A -6: MEUSE-ARGONNE A, N, MC -7: MONTDIDIER-NOYON A, N, MC -8: OISE-AISNE A -9: SOMME DEFENSIVE A -10: SOMME OFFENSIVE A -11: ST. MIHIEL A, N, MC -12: VITTORIO-VENETO A -13: YPRES-LYS A, MC -14: DEFENSIVE SECTOR A, N, MC -15:
5、OVERSEAS N, MC -16: ENGLAND A, N, MC -17: FRANCE A, N, MC -18: ITALY A, N, MC -19: RUSSIA A, N, MC -20: SIBERIA A, N, MC -21: FOREIGN SERVICE A -22: GERMANY A -23: JAPAN A DASH NO. TITLE, MINIATURE SIZE USER -24: FOREIGN SERVICE A -25: GERMANY A -26: JAPAN A DIMENSIONS: HEIGHT (Overall): -1: 1/8 inc
6、h (REF) -2: 3/32 inch (REF) WIDTH (Overall): -1: 1-1/2 inches (REF) -2: 3 /4 inch (REF) THICKNESS (Including embossing): -1: 0.056 0.005 inch -2: 0.050 0.005 inch ATTACHING DEVICE: 1. The attaching device shall be two prongs. 2. The prongs shall be located on the reverse side of the ribbon attachmen
7、t at the horizontal center line equidistant from each end and 3/4 inch + 1/32 inch apart for the regular size and 3/8 inch + 1/32 inch apart for the miniature size. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-41819/9F 3 of 3 NOTES: 1. The
8、 term (REF) refers to the measurements taken from the Government furnished hub or die. 2. -1 through -14 and -24 shall include stars. 3. -16 through -23 are service clasps. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous
9、issue due to the extent of the changes. Custodians: Preparing activity: Army - IH Army - IH Navy - MC Review activity: (Project No. 8455-2013-089) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
